Specifications

5th generation welding machine with low price

can joint overlapping area of heat-meltable material into together without glue.

comparing to glue sticking, welding machine's operation is easier and high efficiency.

And it don't need so much work field and won't be affected by the low temperature.

it has LCD display to show fan, self move speed, and temperature adjustment.

How to weld?

1. overlapping

 Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge

2. warm up

Turn on the machine, prepare warm up about 2 minutes

3. place welder in right location

 Bring up the machine, and place the roll at the end of the overlap edge

4. temperature, self move speed and fan speed adjusted, then weld

According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.

Application:laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster,PVC cloth & PE fabric Canvas, outdoor poster banner,plastic surface, Sailcloth etc.

 
Specification parameter:
1) Alternant electric voltage 220V/50Hz;
2) Upper limit power 2000W, average 800W;
3) Adjustable work temperature 50-600°C;
4) Adjustable self-move speed 0.8-15M/per minute;
5) Whole weight 10 kilogram;
6) Size 40cm*30cm*28cm.