Specifications

 New style plate printing machine

Voltage: 220V &110V
Power: 400W
Spec:10cm for 7.5' plates(standard), 12cm for 10' plates(extra charge).
Temperature Rate: 0-399 degree
The time control range: 0--999 seconds
Heating time: 1~3 minute
avoirdupois:14KG
cubage:390*280*300mm

With time and temperature electronically controlled and the finalization warned, the plate heat press machine is really convenient with high quality.

Operation of plate heat press machine

1. plug the three-core power line into the outlet,check whether the power supply is conformity with the rated voltage of the machine, there should be a reliable ground wire for the power supply.

2. put in the object going to be shaped,close up the handle and rotate the adjusting screw to get a proper pressure .

3. turn on the power switch, and the instrument board will display the temperature .

4.set the temperature and time according to the table below and get the

specific corresponding temperature and timing setting.         

   initial temperature      highest temperature         time

       355                                               355                     150

5.Close up the pressure handle ,preset the corresponding temperature and timing for the object that is going to be shaped,  it needs a few minutes to achieve the initial heating temperature.

When the temperature achieves the initial heating temperature, it will turn into constant temperature status automatically. Pull up the handle,put into the object and close up the the executive key, then close up the pressure handle,wait for a few times(set),you will hear a hint sound ,the pressing is finished, pull up the pressure handle,press the executive key. do the next object or turn off the power.

Machines and consumables needed:

1. Epson printer (four color or six color) to print

2. sublimation ink

3. coated plates

4.sublimation paper

5.plate printing machine/ versatile heat press machine

 we have metal plates, white plates, plate with color rim etc. at stock.