Product Details

Specifications

1.LED indicators show all working condition
2.All necessary protections equipped
3.USB charging function: 5V 1000mA(optional)

CM1012

10A 12V LED SOLAR CHARGE CONTROLLER

CM1012 controller has following features:

1. Intuitionistic LED indicators show the current system battery capacity, charging and discharging state of the battery.

2. Having the protection functions as overcharging, over discharging, overload, short-circuit and reversed connection.

3. Tandem type PWM charging makes the charging efficiency increase by 3% to 6%, compared with non-PWM charging.

4. The parameters of charging and discharging have been set during the production (special parameters need to be told in advance), so no need to adjust the parameters.

5. USB charging function (optional).

LEDs show solar system component status:

1.Charging indicate

Battery capacity state	Full charged	normal	Low capacity	Low battery warning
indicator	green	orange	red	Red flickering

3.Load state indicate

Load state	starting	shutting	overload protection	short-circuit protection
indicator	green on	green off	green flickering slowly	green flickering quickly

Technical Data:

Model	CM1012
Rated current	10A
Rated voltage	12V
Float charging voltage	13.7V
Low voltage protection	10.7V
Low voltage reconnecting	12.6V
charging (Discharging) circuit voltage drop Hoisting voltage	<0.2V(<0.15V) 14.4V (lasting time:10min)
Overloading and short circuit protection	1.25 times than rated current, protect the load within 60 seconds. 2.5 times or over, starting the short circuit protection
no load loss	≤12 mA (not including USB)
Charging mode	PWM
Environmental temperature	-20℃~50℃
Temperature compensation	-4mv/℃/2V(hoisting, floating charging compensation)
installing holes	Φ3.5—55mm*122mm
installing cables diameter	≤16mm²

Certifications: