Specifications

1.LCD display
2.PWM battery charging
3.All necessary protections equipped
4.Adjustable controlling parameter of the system

 

CM5024Z

50A 12V/24V LCD Solar Charge Controller

 

CM series controller is a kind of intelligently, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface various control parameters can be flexibly set, fully meet your various application requirements.

 

CM Series Controller Has Following Features:
1. Image of LCD graphic symbol
2. Simple button operation
3. Automatic Identification System Voltage level
4. Intelligent PWM charge mode
5. Automatic Temperature Compensation
6. Adjustable charge-discharge control parameters
7. Settable Operating mode of Load hours
8. Accumulated function of charge and discharge Ampere
9. Remote monitoring and control function (custom)
10. Battery reverse-discharge protection
11. Battery reverse-discharge protection
12. Battery reverse connection protection
13. Overload, Short Circuit Protection

You can View and Set the Parameters:
1.Battery Voltage
2.The load on/off control
3.Environment Temperature
4.Solar Panel charging current
5.Load discharging current
6.Accumulated charging power (Ah) by solar panel and back to zero
7.Accumulated discharging power (Ah) by Load and back to zero
8.Low Voltage Disconnection Protection
9.Low Voltage Reconnection
10.High Voltage Disconnection

Three Load Working Mode:
24H—Normal Mode, in case of no fault state of the load is always in power.
1H~23H—Light Control with Time Control Mode, Load power after dark, and close the load according to the timer setting.
0H—Light Control Mode, Load on after dark, turn off the load after drawn.

Technical Data:

 

Model	CM5024Z
Rated current	40A,50A
Rated voltage	12V/24V
Maximum voltage of solar  panel	≤50V
Float voltage	13.7V/27.4V
Low  Voltage Disconnection	10.7V/21.4V
Low  Voltage Reconnection	12.6V/25.2V
No load loss	<30mA
Loop voltage drop	≤200mV
Charging mode	PWM  Mode
Temperature compensation	-4mV/Cell/℃
Installation cable  area	>3#  AWG (<25mm2)
Operating temperature	-20℃~50℃
Storage temperature	-30℃~70℃
Humidity Requirement	≤90%, No Condensation
Size	130mm×188mm×62mm
Mounting hole spacing	98 mm×178 mm --Φ5
Weight	590g
Notes	Model suffix“Z” represent automatic identify system voltage level,“T”represent controller with remote monitoring.

 

Certifications: