Specifications
1.Pall hydraulic oil filter element2.More pores per unit area
3.High dirt-holding capacity
4.OEM service is ok
Pall 0896 series hydraulic filter element
Pall 0896 series filter elements are extremely permeable and are constructed of high dirt capacity stainless steel (type 304 or 316L) woven wire mesh. 0896 series media out perform other meshes because they are sintered woven wire meshes with higher void space
Technical Specifications:
Materials of Construction: | Temperature Range: |
Hardware: Corrosion protected carbon steel Media: Inert, inorganic fibers impregnated and bonded with epoxy resins O - ring Code: OR112 per ISO 3601-1 | Nitrile: -43C (-45F) to +107C(225F) Fluorocarbon: -29C (-20F) to +120C (250F) , Note: 60C (140F) maximum for water based fluids |
Collapse Rating: | 210 bard (3045 psid) |
Pressure Drop
Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9.
Characteristics:
Standard cartridges are capable of withstanding a collapse differential of 125
psid in the forward flow (outside-in) direction and up to 600 F and 10 psid in the reverse flow direction
Sizes:
The standard series filters are cylindrical forms of pleated medium, 2 1⁄2inches
in diameter in 10 inch multiple lengths, up to 30 inches
| HC0896FDP3H HC0896FDN3H HC0896FDS3H HC0896FDT3H |
