Pall 2295 series filter elements are extremely permeable and are constructed of high dirt capacity stainless steel (type 304 or 316L) woven wire mesh. 2295 series media out perform other meshes because they are sintered woven wire meshes with higher void space.

This filter with more pores per unit area, providing more dirt-holding capacity than that of an unsintered mesh made from coarser wires. Designs are available which are suitable for temperatures up to 600F/315 C.

Materials of Construction:

Hardware: Corrosion protected carbon steel

Media: Inert, inorganic fibers impregnated and bonded with epoxy resins

Temperature Range:

Nitrile: -43C (-45F) to +107C (225F) 

Fluorocarbon: -29C (-20F) to +120C (250F) ,

(per ISO 2943)Note: 60C (140F) maximum for water based fluids

O - ring Code: OR112 per ISO 3601-1

Collapse Rating:210 bard (3045 psid)

Multiply actual flow rate times factor in table below to

determine pressure drop with fluid at 32 cSt (150 SUS), 

0.9 S.G. Correct for other fluids by multiplying new viscosity 

in cSt/32 (SUS/150) x new S.G./0.9. 

Note: factors are per 1000 L/min and per 1 US gpm.

Standard cartridges are capable of withstanding a collapse differential of 125

psid in the forward flow (outside-in) direction and up to 600 F and 10 psid in the

reverse flow direction

The standard series filters are cylindrical forms of pleated medium, 2 1⁄2inches

in diameter in 10 inch multiple lengths, up to 30 inches.