Specifications
1.tank mounted suction filter2.Graded pore structure
3.High dirt-holding capacity
4.ISO Certification
TF series self-sealing suction oil filter
The TF-series filters can be installed on the top, at the side or in the bottom of the tank.
There is a check valve inside the filter, during maintenance, when filter
element is withdrawn for washing, the check valve will close automatically to
stop oil flowing out from the tank.
A vacuum indicator in the filter gives signals when the pressure drop across the element
reaches 0.018MPa showing that the filter shall be cleaned. If no maintenance
is done, as the pressure drop rises to 0.02MPa, the by-pass valve will open to
allow oil flowing into pump. This kind of filter can be installed at inlet port of the pump, in
order to protect the pump and other component. This filter can help to keep hydraulic system
clean and easy to use.
