Specifications

greens dryer unit
reliable operation
With nice design
Low energy consumption
ISO9001-2008,SGS

Greens Dryer unit

Greens dryer unit

High greens drying efficiency

Device configuration flexibility

Large greens handling capacity

Greens dryer unit introduction:

Mesh belt dryer unit is commonly used in continuous dryer units

The mesh belt dryer unit can be widely used in chemical, pharmaceutical, food, building materials, electronics and other industries

Greens dryer unit is especially suitable for a better ventilation sheet, strip, granular materials drying

And mesh belt dryer unit is also available for drying after the paste materials forming through the mechanism of granulator

Features and characteristics:

Mesh belt dryer unit can adjust air volume, heating temperature, materials residence time, and feeding rate of materials in order to obtain the best possible drying effect

Equipments are configurated flexibility, the mesh belt dryer unit can use the belt cleaning system and material cooling system

Most of the air can be recycling, and high energy saving

Unique air distribution device ensures products quality consistency

Heat source can adopt steam heat transfer oil or gas-fired hot blast stove configuration

Greens Dryer unit Technical Parameter:

Type	DWT1.6-I (fed table)	DWT1.6-II (middle table)	DWT1.6-III (discharge table)	DWT2-I (fed table)	DWT2-II (middle table)	DWT2-III (discharge table)
belt width m	1.6	1.6	1.6	2	2	2
drying section length m	10	10	8	10	10	8
thickness of the material to be covered mm	≤100	≤100	≤100	≤100	≤100	≤100
temperature	50-150	50-150	50-150	50-150	50-150	50-150
Areae of heat conduction m2	525	398	262.5	656	497	327.5
steam pressureMpa	0.2-0.8	0.2-0.8	0.2-0.8	0.2-0.8	0.2-0.8	0.2-0.8
drying time h	0.2-1.2	0.2-1.2	0.2-1.2	0.2-1.2	0.2-1.2	0.2-1.2
power kw	0.75	0.75	0.75	0.75	0.75	0.75
overall Dim.m	12×1.81×1.9	12×1.81×1.9	10×1.81×1.9	12×2.4×1.92	12×2.4×1.92	10×2.4×1.92