Product Details

Single-cylinder Thermoplastic Melter Kettle

1.Brief Introduction

Hydraulic single-cylinder Paint Melter Kettle is one of the key machines for the construction of thermoplastic marking at present. With hydraulic drive as well as positive and reverse rotation controlled by multi-way reversing valve, the melting speed gets faster. It is mostly used in the construction of marking at the sites where fast melting is required such as freeway, State Highway, Provincial Highway etc.

2. Product Image

Double-cylinder Melter Kettle

3. Technical parameters

No.	Model	TW-YC	TW-YA	TW-YB1
1	Outer dimensions	162016201400mm	140014001350mm	750mm1700mm1370mm
2	Empty weight	850kg	550kg	350kg
3	Thickness of boiler bottom	8mm	8mm	8mm
	Diameter of boiler	700mm	550mm	600mm
	Height of boiler	550mm	550mm	550mm
	Capacity of paint	400kg*2	250kg*2	300kg
4	Agitator rotating speed	0-80r/min	0-80r/min	0-80r/min
5	Thickness of outer frame(stainless steel )	2mm	2mm	2mm
6	Capacity of hydraulic oil tank	60L	60L	60L
7	Diesel engine power	12KW (16HP)	7 HP	7 HP
8	Engine start method	Electrical(12V), Manual	Electrical(12V), Manual	Electrical(12V), Manual

It can be customized according to your requirements, such as the customization of materials (Steel plate, Stainless plate), overall dimension, capacity of kneader cylinder, and designated installation mode of diesel engine.

4. Job location

FAQ

1. Q: Can this machine preheat the thermoplastic paint?

A: No. It needs to work with a preheater, like the last picture. The TW-H just can preserve the heat of thermoplastic paint.

2. Q: Do you have thermoplastic road marking machine with preheater?

A: Yes, we have. It is model TW-FJ, which is suitable for small line marking project. For more details,pls check home page.

3.Q: Can I adjust the line thickness? And how?

A: Yes, it could be adjusted by edging knife and hanger. The normal line thickness is 1.2-4 mm.

4.Q: How to mark lines in different width?

A:Change the marking hopper, change line width. We have varied sizes, from 50 mm to 450mm. Usually, the standard equipment is 150mm. The other size is optional. Also, we could produce special marking hopper for you.

5. Q: What about the after-sale service?

A: We are responsible to provide technical advise in the machine's whole shelf life. We help solving problems via whatsapp, skype,viber and email by sending pictures and videos.

6.Q: Could you produce customized machine?

A: Yes, we could. We are the manufacturer of thermoplastic road marking machine in Guangzhou City.