inconel x750 wire
USD $20 - $50 /Kilogram
Min.Order:100 Kilograms
Baoji Haixin Titanium & Nickel Co., Ltd.
Inconel X750 Wire
Alloy X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.
Inconel X-750 Chemical composition:
Alloy | % | Ni | Cr | Fe | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
Inconel X-750 | Min. | 14 | 5.0 | 0.7 | 0.4 | 2.25 | |||||||
Max. | 70 | 17 | 9.0 | 1.2 | 1.00 | 0.08 | 1.00 | 0.5 | 0.01 | 0.5 | 1.0 | 2.75 |
Inconel X-750 Physical properties:
Density | 8.28 g/cm3 |
Melting range | 1393-1427°C |
Inconel X-750 Alloy m inimum Mechanical properties in the room temperature:
Alloy | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % | Brinell hardness HB |
Solution treatment | 1267 | 868 | 25 | ≤400 |
Sheet/Plate : AMS 5542, AMS 5598 Round Bar/Wire : ASME SB-637, AMS 5669, AMS 5698, AMS 5699 Tube : AMS 5582, AMS 5583 Forgings : ASME SB-637, AMS 5667, AMS 5668, AMS 5670, AMS 5671, AMS 5747
Chemical Analysis
Inconel X-750 Characteristic as below: Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment. Inconel X-750 Machinability Conventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting. Inconel X-750 Corrosion resistance Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media. Inconel X-750 Application range and field