Hot Air Soldering and desoldering station/rework station feita 8586 digital soldering iron
USD $35 - $50 /Set
Min.Order:1 Set
Dongguan Feita Electronics Co., Limited
hakko soldering station fr-801 with soldering gun/desoldering station tools
best soldering stations HAKKO FX-951 with soldering iron tips,soldering tools
Dongguan supplier HAKKO FX-951 soldering station /welding machine
cheap HAKKO 907 ESD soldering iron handle/handle iron Tool For 936/937/942/926 Soldering iron
BGA rework station/BGA reballing station/Automatic BGA repair motherboard Station
FEITA FT8586 Hot Air Rework soldering station
Function characteristics
1. closed loop sensor, microcomputer PID control, precise temperature control. LED digital display various state, key switch, convenient and intuitive.
2. hot-air gun power, rapid temperature rising, the wind gentle, big air volume, very suitable for lead-free welding demolition work.
3. welding heating body adopts low voltage power supply, can safely and effectively protect sensitive devices and staff.
4. perfect two-in-one combined, using plastic housing, small, small area occupation of working table.
5. fault alarm function testing.
Technical parameters
1) Switchboard parameters
Nominal voltage | AC 220V±10% 50Hz |
Total Power | 750W±10%(MAX) |
Work environment | 0~40℃ relative humidity<80% |
Storage temperature | -20~80℃ relative humidity<80% |
2) relative humidity
Operating voltage | AC 220V±10% 50Hz |
Output power | 700W±10% |
Temperature range | 100℃~500℃ gas flow:120L/min(Max) |
Temperature stability | ±2℃ (static state) |
Set the mode | Buttons adjust |
Display mode | LED digital display |
Temperature adjustment | Digital calibration |
Temperature lock | Digital |
Nozzle | A1130,A1170,A1110 |
Heating wire | 700W 220V FT858 heating wire |
3) Soldering station parameters
Operating voltage | AC 26V±10% 50Hz |
Output power | 50W±10% |
Temperature | 200℃~480℃ |
Temperature stability | ±2℃ (static state) |
Set the mode | Buttons adjust |
Display mode | LED digital display |
Temperature adjustment | Digital calibration |
Temperature lock | Digital |
Tip-to-ground impedance | <2Ω |
Tip-to-ground voltage | <2mV |
Tips | AT-02-SI |
Heater | 50W four-pin ceramic heater |