Specifications

80t Workover Rig
1.Convenient for installation, operation and maintenance
2.Double drum drawworks
3.Rotary driving system

80T Workover Rig

Product Explanation:

1.XJ450 (80t) workover rig is mainly used for medium & shallow well workover , oil testing, fishing and pump check operations.

2.It is equipped with a lifting system and a rotary operating system. It is widely applied in many fields.

3.It can be used for workover, lateral drilling and water well drilling operation if equipped with a rotary table and relevant parts.

4.Featuring reasonable layout, compact structure, easy transportation, convenient operation and maintenance.

Product Features:

1. A hydromatic brake is often used, and Eaton water-cooled brake or air tong brake is also available.
2.5 forward 5 reverse speeds rotary drives equipped with torque release device.
3. Rod hanger is available.

Main Parameters of workover rig

MODEL	XJ450(80t)
Nominal service depth (ft)(27/8″EUE tubing)	18000
Nominal workover depth (ft)(27/8″DP)	15000
Drilling depth (ft)(41/2″DP)	5000
Max. hook load (lbf)	250000
Rated hook load (lbf)	180000
Engine model	C15
Engine power (hp)	540
Hydraulic transmission box model	S5610HR
Transmission type	Hydraulic + mechanical
Effective height of mast (ft)	102,108 33
Traveling system	5×4
Drilling line diameter (in)	1 1”
Hook speed (ft/s)	0.66~3.93
Chassis model/Drive ways	XD50/10×8
Approaching/departure angle	26°/17°
Min. ground clearance (in)	12
Max. gradient ability (%)	26%
Min. turning diameter (ft)	108
Rotary table model	ZP135
Traveling block model	YG110
Swivel model	SL110
Overall moving dimension (ft)	61×10×14
Main unit mass (lb)	110000