Specifications

100T Workover Rig
1.Convenient for installation, operation and maintenance
2.Reasonable layout
3.Rod hanger is available

100T truck mounted Workover Rig

Product Explanation:
XJ550 workover rig, with 1350kN/30348 of max. static hook load, is mainly used for medium & shallow well workover, oil testing, fishing and pump check operations. It is equipped with a lifting system and a rotary operating system. It is widely applied in many fields. It can be used for workover and lateral drilling operations if equipped with a rotary table and relevant parts. Reasonable layout, compact structure, easy transportation, convenient operation and maintenance.

Product Features:

1. 10×8 self-propelled chassis.
2. A hydromatic brake is often used, and Eaton water-cooled disc brake or air tong brake is also available.
3. 5 forward 5 reverse speeds rotary drives equipped with torque release device.
4. Rod hanger is available.

Main Parameters Of Workover Rig

MODEL	XJ550(100t)
Nominal service depth (ft)(27/8″EUE tubing)	23000
Nominal workover depth (ft)(27/8″DP)	19000
Drilling depth (ft)(41/2″DP)	6600
Max. hook load (lbf)	300000
Rated hook load (lbf)	220000
Engine model	C15
Engine power (hp)	540
Hydraulic transmission box model	S5610HR
Transmission type	Hydraulic +
Effective height of mast (ft)	35102,108
Traveling system	5×4
Drilling line diameter (in)	1”
Hook speed (ft/s)	0.66~4.6
Chassis model/Drive ways	XD50/10×8
Approaching/departure angle	26°/18°
Min. ground clearance (in)	12
Max. gradient ability (%)	26%
Min. turning diameter (ft)	108
Rotary table model	ZP135
Traveling block model	YG135
Swivel model	SL135
Overall moving dimension (ft)	61×10×14
Main unit mass (lb)	120000