Stainless steel is a long hollow circularsteel products, mainly used in petroleum, chemical, medical, food, lightindustry, machinery and other industrial pipeline instrumentation andmechanical structural components. In addition, bending, torsional strength,lighter, so it is widely used in manufacture of mechanical parts andengineering structures.
Standard:
GB/T14975-----------China National Standard
GB/T14976----------- China National Standard
GB13296----------- China National Standard
ASTMA312----------American Society for Testing and Materials Standards
JISG3459---------- Japanese Industrial Standards
Purpose:
For the mechanical structure, the fluid pipes, boiler super heater, heat exchangers, condensers, catalytic tubes.
The main production steel grades:
0Cr18Ni9, 0Cr25Ni20,0Cr18Nil0Ti,00Cr17Nil4Mo2,0Crl8Nil2Mo2Ti,1Crl8Ni9Ti,304,304L,316L,321,SUS304,SUS304L,SUS316L,SUS321 Etc.
After consultation, can also supply other grades of steel.
Mechanical properties:
Standard | Grade | Tensile strength (MPa) | Yield strength (MPa) | Elongation (%) |
≥ | ||||
GB/T14975 GB/T14976 GB13296 | 0Cr18Ni9 | 520 | 205 | 35 |
0Cr25Ni20 | 520 | 205 | 35 | |
0Cr18Ni10Ti | 520 | 205 | 35 | |
00Cr17Ni14Mo2 | 480 | 175 | 35 | |
0Cr18N12Mo2Ti | 530 | 205 | 35 | |
1Cr18Ni9Ti | 550 | 205 | 35 | |
ASTMA312 | 304 | 515 | 205 | 35 |
304L | 485 | 170 | 35 | |
316L | 485 | 170 | 35 | |
321 | 515 | 205 | 35 | |
JISG3459 | SUS304 | 520 | 205 | 35 |
SUS304L | 480 | 175 | 35 | |
SUS316L | 480 | 175 | 35 | |
SUS321 | 520 | 205 | 35 |
Chemicalcomposition:
Standard | Grade | Chemical Composition | ||||||||
C | Si | Mn | P | S | Ni | Cr | Mo | Ti | ||
≤ | ||||||||||
GB/T14975 GB/T14976 GB13296 | 0Cr18Ni9 | 0.07 | 1 | 2 | 0.035 | 0.3 | 8.00~11.00 | 17.00~19.00 | / | / |
0Cr25Ni20 | 0.08 | 1 | 2 | 0.035 | 0.3 | 19.00~22.00 | 24.00~26.00 | / | / | |
0Cr18Ni10Ti | 0.08 | 1 | 2 | 0.035 | 0.3 | 9.00~12.00 | 17.00~19.00 | / | >5×C% | |
00Cr17Ni14Mo2 | 0.03 | 1 | 2 | 0.035 | 0.3 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 | / | |
0Cr18N12Mo2Ti | 0.08 | 1 | 2 | 0.035 | 0.3 | 11.00~14.00 | 16.00~19.00 | 1.80~2.50 | 5×C%~0.70 | |
1Cr18Ni9Ti | 0.12 | 1 | 2 | 0.035 | 0.3 | 8.00~11.00 | 17.00~19.00 | / | 5(C%-0.02)~0.80 | |
ASTM A312 | 304 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 8.00~11.00 | 18.0~20.0 | / | / |
304L | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 8.00~13.00 | 18.0~20.0 | / | / | |
316L | 0.035 | 0.75 | 2 | 0.04 | 0.03 | 10.0~15.0 | 16.0~18.0 | 2.00~3.00 | / | |
321 | 0.08 | 0.75 | 2 | 0.04 | 0.03 | 9.00~13.00 | 17.0~20.0 | / | 5×C%~0.70 | |
JIS G3459 | SUS304 | 0.08 | 1 | 2 | 0.04 | 0.03 | 8.00~11.00 | 18.00~20.00 | / | / |