Hot selling!! EN standard Pressure equipments seamless pipe, made in China
USD $10 - $100 /Piece
Min.Order:1 Piece
Sinotai Petroleum Equipment Co., Ltd.
Standard:
EN 10216-1 ---- EU standards
EN 10216-2 ---- EU standards
Standard | Grade | Tensile strength (MPa) | Yield strength (MPa) | Elongation (%) |
EN10216-1 | P195 | 320~440 | ≥195 | ≥27 |
P235 | 360~500 | ≥235 | ≥25 | |
P265 | 410~570 | ≥265 | ≥23 | |
EN10216-2 | P195GH | 320~440 | ≥195 | ≥27 |
P235GH | 360~500 | ≥235 | ≥25 | |
P265GH | 410~570 | ≥265 | ≥23 | |
13CrMo4-5 | 440~590 | ≥290 | ≥22 | |
10CrMo9-10 | 480~630 | ≥280 | ≥22 |
Purpose:
For the boiler pipes, tobacco pipes, super heater tubes, air preheater tubes.
The main production steel grades:
P195, P235, P265, P195GH, P235GH, P265GH, 13CrMo4-5, 10CrMo9-10 and so on.
Following consultations, can also be supply other grades of steel pipe.
Chemical composition:
Standard | Grade | Chemical Composition | |||||||||
C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
EN10216-1 | P195 | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / |
P235 | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
P265 | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
EN10216-2 | P195GH | ≤0.13 | ≤0.35 | ≤0.70 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / |
P235GH | ≤0.16 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
P265GH | ≤0.20 | ≤0.40 | ≤1.40 | ≤0.025 | ≤0.020 | ≤0.30 | ≤0.06 | ≤0.30 | ≤0.30 | / | |
13CrMo4-5 | 0.10~0.17 | ≤0.35 | 0.40~0.70 | ≤0.025 | ≤0.020 | 0.70~1.15 | 0.40~0.60 | ≤0.30 | ≤0.30 | / | |
10CrMo9-10 | 0.08~0.14 | ≤0.50 | 0.30~0.70 | ≤0.025 | ≤0.020 | 2.00~2.50 | 0.90~1.10 | ≤0.30 | ≤0.30 | / |