RTC70... Electric heating thermostat

Introduction

The RTC70.XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat. The thermostat acquires the room temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application

For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

Features

LED indicator is light when heating is on

With manual switch and knob for easy operation

On/off control output for heating device

Setback function when connecting with a programmable timer (RTC70.33&RTC70.36)

Temperature limitation function for protecting the floor (RTC70.33&RTC70.36)

Technical data

Voltage: AC230V (AC110V / AC24V available)

Power consumption: 5W

Setting range: 4℃~45℃

Limitation scale: 25℃~50℃ (RTC70.33&RTC70.36)

Setback temperature: 5℃ (RTC70.33&RTC70.36)

Switching differential: ±0.5K

Ambient temperature: -5℃~50℃

Protective housing: IP20

Housing material: self-extinguishing PC

Floor sensor: rubber-thermoplastic NTC sensor,

cable length is 3m

Selection Table