SEH35...Electro-thermal Actuator

Introduction

The SEH35.XX can be used with electrical on/off controls to activate several types of valves and floor heating manifolds, the actuator is made for either 24V or 230V supply in normally closed.

Application

Fitted on manifolds or small valves for the control of warm-water(floor) heating systems used in commercial buildings, residential buildings, light industrial buildings...

Features

> Wax-filled element from France, PTC heating to start

> Spring re-set function, the valve close or open when power off( normal closed and normal open)

> Noise-free operation

> Position indicator on actuator

> Nut connects for install and dismounting easy

> Normal closed factory setting is open that is easy to water pressure testing( It will return to normal after the first power on connecting)

Technical data

Voltage: 230V/220V, AC24V,110V

Power consumption: 2W

Force: 110N

Stroke: 3mm

Running time: 180S

Valve interface: Cap nut M30X1.5 mm

Ambient temperature:5℃-50℃

Cable Length: 900 mm

Housing material: PC+GF10

Protective housing: ±45℃,IP43, 45℃...90℃IP41