Specifications

1.htdraulic ironworker tool
2.manufacturer
3.High quality with competitive price
4.Easy to operat

Introduction to the structure and properties:

Q35Y Series hydraulic combined punching&shearing machine can cut and punch all kinds of materials such as plate, square bar, angle, round bar, channel and so on. Accurl Industrial hydraulic ironworkers have been designed and built to the highest quality standards in the industry. This profitable machine will serve any grueling fabrication shop for decades to come. This machine is typically in stock for quick deliveries.

 

1.Punching

Full range of universal punches and dies are available.unique style allows for large angle iron punching and large channel punching.Large viewing window on stripper swing away design for ease of operation.large two piece gauging table with rulers and stop as standard fittings.Quick change coupling nut and sleeve for rapid replacement of change.

 

2.Shearing

Round and square bar shear has multiple holes for a variety of sizes. Adjustable hold down device for round/square bar,channel/beam cutting. Large strong guarding for max safety. The angle shear has the ability to cut angle at 45°both top and bottom leg. This gives the operator the ability to make a picture frame corner for perfect welds.Diamond shaped blade for quality cuts that is minimal material lost and deformity. Easily adjustable hold-down device for accurate plate cutting.Large 15″squaring arm with inlaid scale.Special anti-distorted blade for quality cutting.Lower blade has four usable edges.There is screw allow for gap adjust no shim needed.

 

3.Notching

Unique design allows for cutting of angle and flat bar. Electrical interlock safety guard and three gauging stops for precise positioning.The notching section of this hydraulic ironworker is perfect for notching out metal plate, angle iron and much more. The notching station also has an oversized table with material stops. This section of the machine can also be outfitted with the optional vee notcher.

 

4.Bending

Also bend the plate below 500mm. All the components of Machine are of the highest quality in their safty, function, capability and maintenance

 

Technical parameters

Model	Q35Y-25
Punching Pressure(T)	115T
Max.cutting thickness of steel pltes(mm)	25
Plate strength(N/mm2)	≤450
Angle of Shear	8
A trip size(T×W)(mm)	25×330 16×600
Slider trip(mm)	80
Trips frequency(times/min)	9-18
Throat depth(mm)	400
Punch depth(mm)	25
Max.punching diameter(mm)	35
Main Motor Power(KW)	7.5
Overall diamensions(L×W×H)(mm)	2355×960×2090

 

Model you can choose

 

Types of profiled steel for shearing 

                                                                   (If you need Joist or Channel, need special order)

Profile		Q35Y-16	Q35Y-20	Q35Y-25	Q35Y-30	Q35Y-40
Round Bar		45	50	60	65	70
Square Bar		40×40	50×50	50×50	55×55	60×60
Equal Angle	90.Shearing	125×125×12	140×140×12	160×160×14	180×180×16	200×200×18
	45.Shearing	70×70×8	70×70×10	80×80×7	80×80×12	80×80×10
T-Bar	90.Shearing	120×120×12	140×70×12	160×160×14	180×180×16	200×200×18
	45.Shearing	60×60×8	70×70×10	80×80×10	80×80×10	80×80×10
Joist		126×74×5	200×102×9	126×74×5	280×124×10.5	280×124×10.5
Channel		126×53×5.5	160×60×6.5	126×53×5.5	280×86×11.5	300×89×11.5

 

Pictures