Plate cover roll forming equipment
USD $1,745 - $3,920 /Set
Min.Order:1 Set
Nanpi Huatong Roll Forming Machinery Manufacturing Factory
1. Name of machine:
HT plate cover forming equipment
(also named double side sealing equipment )
2.Technique parameters of cover forming equipment:
(1) Thickness of middle plate : 18mm
(2) Steps of roller : 7steps
(3) Diameter of shaft (solid shaft): 30mm
(4) Material of shaft (solid shaft): (high grade) 45# Steel, quenched and tempered treatment,hard chromize coated 0.05-0.07mm
(5) Drive type of roll forming machine : drive by chain
(6) Chain : 12.70 mm (high grade)
(7) Bearing : 6205 (high grade)
(8) Reducer : 4# cycloid reducer (high grade)
(9) Power of main motor : 0.75KW
(10) Voltage : 380V/50Hz/3phase
(11) lined speed : about 9 m/min
(12) Suitable coil thickness : accepted thickness for steel coil is 0.30mm-0.60mm.
(13) Width of covering : 12.5mm
(14) Appearance size of main forming machine : 1170mm (length)*680mm (width) *900mm (height)
(15) Weight of main forming equipment : about 0.3T
3.Photo of cover equipment :
Panel produced by cover forming equipment
4.certification ofISO 9001:2000 for Plate cover forming equipment