Overview

ZXSDR BS8700 is the new generation distributed base station. With all IP MicroTCA architecture and RRU series, BS8700 meets the requirements of rapid flexible networking & smooth network convergence towards LTE.

Customer Value

Wide coverage
Supporting 4-level RRU connection in cascade, maximum 100 km for UMTS coverage

RRU near antenna installation with less feeder loss and better coverage

Multi-RRU for one logical cell used for high speed railway coverage

Rapid Installation
Compact RRU design, Light and small

Supporting wall/pole/gantry mounted and on top of tower installation

IP65 protection class to withstand terrible environment

Flexible Networking
Supporting ATM/IP dual protocol stacks

Providing various interfaces E1/T1/STM-1/GE/SDH/Hybrid/ Satellite

Saving Energy
50% high efficient PA to reduce power consumption

Natural cooling design, 0dB noise

Smooth Evolution
MicroTCA based architecture, control & transmission parts totally shared

Software defined carrier by MCPA technology

2T4R module introduced for MIMO or 2 sectors

Smooth Evolution to HSPA+ and LTE

R8840 is a UMTS multi-carrier radio unit, working on 2100MHz/AWS. R8840 supports maximum 4 carriers, the output power is 60W. R8840 module consists of MCPA (multi-carrier power module) module, transceiver module, duplex filter LNA and RPWAC/DC (Power for AC or DC). There are one TX/RX port and one RX port for connecting antenna. R8840 employs compact cabinet design, as shown in Figure 16. Dimension of R8840 is 370×320×160mm (H×W×D).

R8860 is multi-carrier RF module, working on 850/900/1800/1900MHz. R8860 can be configured as GSM only, UMTS only or mixed mode module. R8860 can be configured to 1 to 6 TRX in GSM mode. In case of GMSK modulation, 80W TOC output power can be provided. If R8860 is used as UMTS mode, it can support 4 carriers with 80W TOC output power. In mixed mode, R8860 can support 4 GSM TRX and 1 UMTS carriers or 2 GSM TRX and 2 UMTS carriers.

R8880 is a multi-carrier RF module. R8880 can be configured as UMTS mode. It can process 2 received signals and 2 transmitted signals. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can be configured as UMTS mode. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier.

R8882 is a multi-carrier RF module. R8880 can be configured as UMTS mode. It can process 4 received signals and 2 transmitted signals. Each one can support 2*2 MIMO in HSPA+ mode on 2100MHz. Its output power achieves up to 2*60W (TOC). It is mainly used for outdoor macro coverage and also used for indoor coverage signal source. R8880 can support 3 carriers when it ensures the 2*20W output power for each carrier.

Packaging & Shipping

Trade terms: FOB,CIF,CFR,etc
Price Terms: L/C,D/P,T/T,Western Union,PAYPAL
Payment Terms: T/T in advance
MOQ: 1 pcs
Port: Hongkong / Shenzhen
Lead time: Within 5 working days after receipt payment.
Shipment: Express, Air, Sea
Supply capability: 200 Piece/Pieces per Week
Sample availability: Yes( not free)
Package information: carton package with Huawei /Alcatel / ZTE/ Emerson original package

Our Services