Specifications

1. Good quality
2. Best price
3. Various sizes
4. Quick delivery
5. Small MOQ

Tubular rivet is also named hollow rivet , which is developed on the basis of semi-tubular rivet . the head usually is flat just like a cap and with a taper on the edge of cap , this is different from semi-tubular rivet has various head styles . the point of tubular rivet is flat and with a chamfer .

 

Tubular rivet is widely used to leather , shoes and cloth etc , it is only to rivet light parts as itself is very light and the head can not hold heavy duty .

 

Tubular rivet is made from brass , and are available for stainless steel , carbon steel , and copper as well .

 

Tubular rivets can theoretically be flared out and set by hand, but they are almost always set with a hand held rivet machine that inserts a plug into the hollow portion of the tube and automatically expands it and latches the bent shell to the surface. This requires only about half the force necessary for flattening a solid rivet, preserving rivet strength and saving energy. Semi tubular rivets generally offer stronger support than fully tubular rivets, but they both work in very similar manners.

 

 

 

 

 

 

 

 

Advantages of  tubular  rivets

 

1. Simple design

 

2. easy to use

 

3. various sizes

 

4. different material available

 

5. long service

 

 

About brass 

 

 

1. Good Corrode resisting .

Parts are made of brass , this kind of material is very resistant for corrossion .

 

 

2. Ideal abrasive resistance .

The material for part is alloy brass , the hardness can get to HBS150 .

 

 

3. Perfect conductivity .

The Solidus for part temperature is 821 degrees , and conductivity is 6.5γ/% .

 

 

4. High Tensile strength .

Brass can gets more hardness once added alloy elements , generally , which can be up to 400δ/MPa .

 

 

5. Remarkable thermal conductivity .

the thermal conductivity of brass is 80 λ/w under normal temeperature .

 

 

 

Quality control

 

 

(1) Checking material before feed in

all material must be checked according to the requirements of products before put them onto the machines to ensure material is available .

 

(2) IPQC ( by handle and auto-machined control )

The semi-finished products must be checked in special tools during production , this ensure products are always under control .

 

(3) Chemical elements analysis and fhysical testing after post treatment

The most metal products need post treatment after finished proudct, all products will be tested after than to make sure the quality of products are meet the related requirement .

 

(4) The second inspection , sort all finished goods by sorting machines if required ;

All goods were finished , they must to be tested and checked before package ; In this phase , goods will be checked in full inspection or partial inspection . and checking methods can be by handle or auto-machines .

 

(5) Packing

Packed in polybags and cartons or in small color bags .

 

(6) Last inspection ( spot checking , packages status , quantity etc )

When all goods are ready , we will make a final inspection for quantity and package’s status .

 

(7) Delivery

Everything is ready , we will deliver goods to appointed place or port according talking

 

 

 

Packing

 

1. In bulk

 

 

                chipboard cartons with belt on the outside

 

Items are packed in apparent polybags and solid cartons then , usually 3-5 bags in each carton and the gross weight is about 15 kilograms .

 

The sizes of the carton

 

20x28x16

16x18x25

20x22x28

16x18x28

 

Application

 

This package is usually for private use in the factory to assemble parts

 

 

Advantage

 

1) suitable for production line in the factory

 

2) big quanity each bag

 

3) low cost on package

 

 

 

 

2. Box

 

 

 

Items are packed in boxes inside and some boxes to a carton , the boxes would be colored or plain . 10-15 kilograms each carton . it contains plastic box and chipboard box . and both kinds of boxes can be print the customer’s logo .

 

 

Application

 

Box package is usually for sales in store .

 

Advantages

 

1) Individual packing

 

2) Customization design

 

3) Easy to sales

 

4) easy to check

 

5) easy to carry

 

6) not easy broken

 

7) beautiful apperance.

 

 

 

FAQ’s

 

Q. How about your capacity ?

 

A. With scale of ten thousand square meters , different processing machines , we are able to finish up to 2000 tons raw material every year , generally , one full 20 feet container ( about 20 tons) can be done in 20- 25 days .

 

 

Q.How long I can get samples for approval before placing order ?

 

A. Let you get and confirm samples in first time is our reponsiblity and pleasure , just in one week for new samples that need to be done in new tools , and we can deliver samples within 24 hours for exsiting samples once received your request .

 

 

Q.What are your popular payement menthods ?

 

A. T/T is our prior choose for all , of course , we are also accept L/C , Westunion , paypall .