AC Servo System, buy Maxsine 1500rpm bending machine 4.3kw servo motor and servo driver price on China Suppliers Mobile

Product Details

Specifications

1'2500 ppr TAMAGAWA encoder
2' High power
3' Easy to operate
4' Wide application
5' ISO, BV

Production Description of Maxsine 1500rpm bending machine 4.3kw servo motor and servo driver price

All-digital AC Servo Driver: currently covers power range from 50w to 5.5kw.

Permanent Magnet AC Servo Motor: currently covers torque from 0.6Nm to 48Nm
and power from 50w to 7.2kw.

Introduction of Servo Driver 180MSH27015F

Name	servo motor
Model	180MSH27015F
Rated Power	4300w
Rated Line Voltage	3 phase 380VAC
Rated Line Current	10.0A
Rated Speed	1500rpm
Rated Torque	27.0Nm
Peak Torque	67.0Nm
Rotor Inertia	6.1*10^-3 kg·m²
Lines of Encoder	2500ppr
Motor Insulation Class	ClassB(130°C)
Operating Environment	Temperature: -20°C ~ +50°C; humidity: relative humidity (RH)<90% (not including condensing condition)

Introduction of EP3-GH170F

Introduction of EP3 Size

Introduction of EP3 Specification

Model			GH 170
Rated output Power(kW)			5.0
Rated output current(A)			17
Input power		Main supply	3-phase 380VAC -15%~+10% 50/60Hz
		Control supply	24VDC±15% not less than 1.5A
Environment		Temperature	Working:0C ~ 40C Storing: -40C~ 50C
		Humidity	Working:40% ~ 80%(non condensing) Storing:under 93%(non condensing )
		Atmospheric Pressure	86kPa ~ 106 kPa
Protection Level			IP20
Control Mode			vector control
Regenerative Braking			built-out
Feedback Mode			2500 line incremental encoder or 17 bit absolute encoder
Control Mode			Position, speed, torque, position/ speed,speed/torque,position/torque
Digital input			5 Programmable input terminals(Optical Isolation)
Digital Output			3 Programmable input terminals(Optical Isolation)
Signal Output of encoder	Signal Types		A,B,Z Differential output,Z signal open-collector output
	Poles		Programmable fractional frequency(using incremental coder)/ 1~131072P/R(using absolute encoder)
Position	Input Frequency		differential input:not more than 500kHz(kpps), single-ended input:not more than200kHz(kpps)
	instruction mode		Pulse+Signal,CCW Pulse/CW Pulse, Two-phase A/ orthogonal Pulse
	Electronic Gear Ratio		1 ~ 32767/1 ~ 32767
Speed	Simulation command input		-10V ~ +10V,input impedance10kΩ
	Instructions Acceleration And Deceleration		Parameters set
	Instructions source		analog,Internal speed instructions
Torque	Simulation command input		-10V ~ +10V,input impedance10kΩ
	Speed restriction		Parameters set
	Instructions source		analog,Internal torque instructions
Special Functions			ZRN ,Gain switch,mechanical resonance wave trap, sustaining Modbus agreement
Surveillance Function			Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc.
Defensive function			Overspeed,Overvoltage,Overcurrent,Overload,Abnormal brake,Abnormal Encoder,out of tolerance etc.
Feature	Speed Frequency Response		not less than 300Hz
	Speed Fluctuation Rate		less than ±0.03%(load 0 ~ 100%); less than±0.02%(power-15% +10%)
	Speed Ratio		3.513888889