Product Details

PCBA specific instruction

Material:FR-4

Layer: 2 layers

Surface finish, HASL lead free

Solder mask: Green

Silk screen: White

The othere surface finish we could do are; Gold finger, OSP, ENIG, HAL, Gold plating, Chemical silver, etc.

The other solder mask type we could do are: Red, yellow, white, black, purple

PCBA&SMT PCB&PCB SMT&electronic assembly&pcb electronic

1.Specification for PCB Manufacture:

Item	Specification
Numbr of Layer	1-38Layers
Material	FR-4,FR2.Taconic,Rogers, CEM-1 CEM-3,ceramic , crockery
Material	Metal-backed Laminate
Remarks	High Tg CCL Is Availabe(Tg>=170ºC)
Finish Board Thickness	0.2mm-6.00 mm(8mil-126mil)
Minimun Core Thickness	0.075mm(3mil)
Copper Thickness	1/2 oz min;12 oz max
Min.Trace Width & Line Spacing	0.075mm/0.1mm(3mil/4mil)
Min.Hole Diameter for CNC Driling	0.1mm(4mil)
Min.Hole Diameter for punching	0.9mm(35mil)
Biggest panel size	610mm*508mm
Hole Positon	+/-0.075mm(3mil) CNC Driling
Conductor Width(W)	+/-0.05mm(2mil)or
Conductor Width(W)	+/-20% of original artwork
Hole Diameter(H)	PTH L:+/-0.075mm(3mil)
Hole Diameter(H)	Non-PTH L:+/-0.05mm(2mil)
Outline Tolerance	+/-0.125mm(5mil) CNC Routing
Outline Tolerance	+/-0.15mm(6mil) by Punching
Warp & Twist	0.70%
Insulation Resistance	10Kohm-20Mohm
Conductivity	<50ohm
Test Voltage	10-300V
Panel Size	110×100mm(min)
Panel Size	660×600mm(max)
Layer-layer misregistration	4 layers:0.15mm(6mil)max
Layer-layer misregistration	6 layers:0.25mm(10mil)max
Min.spacing between hole edge to circuity pqttern of an inner layer	0.25mm(10mil)
Min.spacing between board oulineto circuitry pattern of an inner layer	0.25mm(10mil)
Board thickness tolerance	4 layers:+/-0.13mm(5mil)
Board thickness tolerance	6 layers:+/-0.15mm(6mil)
Impedance Control	+/-10%
Different Impendance