Product Details

beauty products Perfume Making Machine

Introduction:

The series of MF Stainless Steel detergent mixer/shampoo mixer/lotion mixer/hand soap mixer are made of stainless steel (SUS304 or SUS316L). All joints and inside is mirror finished without any dead angle and cleaned easily. It consists of inner vessel, jacket and insulation with the configurations of agitator, CIP hole, Manhole, sight glass, thermometer etc. The interior surface of the vessel is subjected to mirro polishing 300EMSH(sanitary level), which is in accordance with sanitary requirements.

Technical parameters:

Capacity	1000Liter (Design capacity:1200Liter)
Kettle Cover	Liquid(particle)inlet, material inlet, air inlet with filter, inspect light and sight glass, CIP drencher head, vacuum port, pressure meter(1 to -0.1 bar)
Mixing pot	Material		Inner layer: SUS316L thickness: 8mm
			Middle layer: SUS304 thickness: 6mm
			Outside layer: SUS304 thickness:3mm
	configuration		Bottom material exhaust, size: 2”
			Temp. sensor (0-199℃), PT100
Stirring system	Homogenizer	1.Material: SUS316L; standard homogenizer 2. Power: 15kw/380V/50Hz;RPM: 0-1400R/Min
	Stirring scrap and middle stirring	Material: SUS304,Scrap material: PTFE
		1. Stirring scrap and middle stirring use the same motor 2,Power:5.5kw/380V/50Hz;RPM:0~48r/min(Frequency control) 3. Stirring scrap and middle stirring rotating the opposite direction
Vacuum system	1. Vacuum pump: water recycle, power 4kw/380/50Hz
Heating method	Electric heating: 36kw, cooling water inlet
discharging	Bottom valve
Pressure	Jacket working pressure:0.3Mpa
Dimension	150013503200mm(LWH)

drawing:

transportation:

parts: