FZG -10 Vacuum Drying Oven/vacuum dryer
USD $3,000 - $10,000 /Set
Min.Order:1 Set
Changzhou Shinma Drying Engineering Co., Ltd.
Principle of FZG -10 Vacuum Drying Oven/vacuum dryer:
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying . if use vacuum to take air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. The condenser can be substituted by SK series water-ring vacuum pump or ZSWJ series hydropower spray vacuum pump unit if available.
Application of FZG -10 Vacuum Drying Oven/vacuum dryer:
It is Suitable for drying of thermal sensitive materials easily resolved. Polymerized or deteriorated under higher temperature and it is wide used in pharmaceutical, chemical, foodstuff and electronic industries.
Parameters of FZG -10 Vacuum Drying Oven/vacuum dryer:
parameter/model | YZG-600φ×L |
YZG-1000φ×L
| YZG-1400φ×L | FZG-15L×W×H |
Inner size of syring chamber(mm) | 600×976 | 1000×1527 | 1400×2054 | 1500×1400×1220 |
Outer size of drying chamber(mm) | 1153×810×1020 | 1693×1190×1500 | 2386×1657×1920 | 1513×1924×2060 |
Layers of backing support | 4 | 6 | 8 | 8 |
interval(mm) | 81 | 102 | 102 | 122 |
Size of baking tray(mm) | 310×600×45 | 460×640×45 | 460×640×45 | 460×640×45 |
Quantity of baking tray | 4 | 12 | 32 | 32 |
Working pressure inside the pipe of baking support(MPa) | ≤0.784(8kg/cm2) | ≤0.784 | ≤0.784 | ≤0.784 |
Temperature inside the chamber(°C) | ≤150 | ≤150 | ≤150 | ≤150 |
Degree of vacuum inside the chamber when operation in idle, MPa | ≤30 | |||
Under the vacuum condition of 30and110°C ,evaporation rate of water(kg/m2,h) | 7.2 | |||
Model and power of vacuum pump when condenser is used(kw) | 2X-15A 2kw | W3 5.5kw | W3 7.5kw | 2X-70A 7.5kw |
Model and power of vacuum pump when condenser is not used(kw) | SK-0.8 2.2kw | SK-3 5.5kw | SK-3 7.5kw | SK-3 7.5kw |
Weight of drying chamber(kg) | 250 | 800 | 1000 | 2100 |