Specifications
Key Features of Reliable 3 phase Online LF UPS 380V 60kva1. Independent R&D technology;
2.Simplified Circuit Borad design.
Advantages of GP33-60i 3 phase online LF UPS 380V 60kva
1. The low frequency UPS is mature electric equipment and the reliability is very high and well known.
2.Its simplified circuit board design allows us to use small quantity of PCB (5 PCB: control PCB, rectifier PCB, Bypass PCB, IGBT drive PCB and display PCB), and all these PCB can be used in different models. This helps you and your customers to keep small quantity of spare parts for support. The PCBs are compatible with other capacities, for example the control PCB is the same for all the models up to 200 kva. The technicians only learn about 1 model, and after this they will know all powers from 20 to 200kva.
3. Full support and 100% Intellectual Property allows flexible changes if the customer needs, like names on display, different calibrations, different voltages, better support etc.
4. Less stock for spare parts, easy connection.
5. Parallel ready: all our units come ready to work in parallel, and no need to add PCB or pay more for this function.
6. The control is totally digital. This means that all the calibrations and settings are digital, and we don’t use potentiometers to do the calibrations which assures that all the settings will not change through the time, since the potentiometers may be affected by vibrations.
7. ECO mode for improving the efficiency to near 98%.
8. Isolation transformer is included for all models.
9. Transient protection: our unit has transient protections to protect the UPS and the load for transients which reduces the probability of UPS failures.
10. Our unit can work all the time even with wrong polarity on the phases for rectifier input.
11. Internet Support: just need connect a SIM card to this UPS, and we will be able to diagnose the UPS and help you offer prompt solution to your customers. (optional)
Specification Sheet of GP33-60i 3 phase online LF UPS 380V 60kva
| specification model | GP33-20i | GP33-30i | GP33-40i | GP33-60i | GP33-80i | GP33-100i | GP33-120i | GP33-160i |
| general | ||||||||
| capacity | 20kva / 16 kw | 30kva / 24 kw | 40kva / 32 kw | 60kva / 48 kw | 80kva / 64 kw | 100kva / 80 kw | 120kva / 96 kw | 160kva / 128 kw |
| features | scalable power / ups parallel ready with another of the same capacity / 100% microcontroller / redundant forced ventilation / immune to phase rotation input / dual input type input (optional) | |||||||
| estimated useful life | 20 years | |||||||
| efficiency ac / ac | 90% | |||||||
| transfer time | 0 sec | |||||||
| design technology | true online (double conversion), inverter based on igbt's | |||||||
| input | ||||||||
| voltage (*) | 3x380/220 vac ± 20% | |||||||
| frecuency (*) | 50hz ± 10% | |||||||
| power factor | 0.8 | |||||||
| technologie | RECTIFIER 6 PULSES | |||||||
| lead wires (*) | 3 phases +neutral+ground | |||||||
| output | ||||||||
| voltage (selectable) (*) | 3x380/220 vac ± 1% | |||||||
| frecuency | 50hz ± 0.1% | |||||||
| waveform type | sine wave generated by the inverter with high frequency pwm | |||||||
| harmonic voltage distortion t.h.d | <2% for linear load / <5% for non-linear load | |||||||
| crest factor | 3 : 1 | |||||||
| power factor | 0.8 | 0.8 | ||||||
| overload recovery. | automatic | |||||||
| isolation transformer | dry type for inverter - voltage 380v/220v | |||||||
| voltage regulation | ± 1% for balanced load. | |||||||
| overload capacity (*) | 125% for 12 minutes. / 150% for one minute | |||||||
| wires (*) | 3 phases +neutral+ground | |||||||
| batteries | ||||||||
| type (*) | sealed and maintenance free. technology vrla (valve regulated lead acid) | |||||||
| autonomy at full load (*) | 5 to 15 minutes. extended range capability. | |||||||
| typical recharge time. | 4 hours 90% | |||||||
| battery management. | auto-test, adjustable battery transfer point and settings of alarm. | |||||||
| battery protection. | breaker protection. turn the system off when the battery is low. battery test. smart charger. | |||||||
| charger | soft start to full load. current limiter for charging batteries. | |||||||
| protections | ||||||||
| hardware protection | breaker (termomagnetic) for input, output, battery(in battery case for >=100kva),fast acting bypass fuse, fast-acting fuses in dc and bypass, fan, redundant power supply, temperature sensors, on-off switch, audible alarms. | |||||||
| bypass | static, solid state, automatic and uninterrupted operation manual for maintenance breaker, external bypass (optional) | |||||||
| emergency breaker. | local EPO and / or remote | |||||||
| monitoring and communications | ||||||||
| front panel | standar: LED display voltage, current etc optional: lcd display 240 * 128 reading electrical parameters. touchscreen. led mimic. | |||||||
| alarms | audible and visual alarms for non-normal conditions. | |||||||
| communications | rs232 serial port. "snmp-rj45" for remote monitoring (optional). gprs module for remote monitoring viacellular network (optional). | |||||||
| ups conditions | ||||||||
| temperature | 0°c to 40°c | |||||||
| relative humidity. | 0 to 95% noncondensing | |||||||
| audible noise | <60 db at 1.5 meters | <65 db at 1.5 meters | ||||||
| batteries conditions (recommended) | ||||||||
| temperature | 0°c to 25°c | |||||||
| relative humidity. | 0 to 95% noncondensing | |||||||
| dimensions and weights | ||||||||
| ups dimensions in mm (front x hight * deep) | 540x1120x 620 | 540x1120x 620 | 660x1550x865 | 660x1650x865 | 690x1650x900 | 1100 x 1800 x 900 | 1100 x 1800 x 900 | 1200 x 1900 x 900 |
| battery cabinet dimensions mm, depend of backup time (front x hight * deep aprox) | 270x1125x 774 | 270x1125x 774 | 432x1550x897 | 432x1550x897 | 432x1550x897 | 800 x 1900 x 900 | 800 x 1900 x 900 | 800 x 1900 x 900 |
| ups weight in "kg" | 225 | 273 | 500 | 600 | 700 | 850 | 850 | 850 |
| battery case weight in "kg". | 59 | 59 | 105 | 105 | 125 | 240 | 240 | 240 |
Product Picture
Company pictures
company building