Specifications

Key Features of Reliable 3 phase Online LF UPS 380V 60kva
1. Independent R&D technology;
2.Simplified Circuit Borad design.

Advantages of GP33-60i 3 phase online LF UPS 380V 60kva

 

1. The low frequency UPS is mature electric equipment and the reliability is very high and well known.

 

2.Its simplified circuit board design allows us to use small quantity of PCB (5 PCB: control PCB, rectifier PCB, Bypass PCB, IGBT drive PCB and display PCB), and all these PCB can be used in different models. This helps you and your customers to keep small quantity of spare parts for support.  The PCBs are compatible with other capacities, for example the control PCB is the same for all the models up to 200 kva. The technicians only learn about 1 model, and after this they will know all powers from 20 to 200kva.

 

3.  Full support and 100% Intellectual Property allows flexible changes if the customer needs, like names on display, different calibrations, different voltages, better support etc.

 

4.  Less stock for spare parts, easy connection.

 

5.  Parallel ready: all our units come ready to work in parallel, and no need to add PCB or pay more for this function.

 

6. The control is totally digital. This means that all the calibrations and settings are digital, and we don’t use potentiometers to do the calibrations which assures that all the settings will not change through the time, since the potentiometers may be affected by vibrations.

 

7.  ECO mode for improving the  efficiency to near 98%.

 

8.  Isolation transformer is included for all models.

 

9.  Transient protection: our unit has  transient protections to protect the UPS and the load for transients which reduces the probability of  UPS failures.

 

10.  Our unit can work all the time even with wrong polarity on the phases for rectifier input.

 

11.  Internet Support: just need connect a SIM card to this UPS, and we will be able to diagnose the UPS and help you offer prompt solution to your customers. (optional) 

 

Specification Sheet of  GP33-60i 3 phase online LF UPS 380V 60kva

 

 

specification   model	GP33-20i	GP33-30i	GP33-40i	GP33-60i	GP33-80i	GP33-100i	GP33-120i	GP33-160i
general
capacity	20kva /      16 kw	30kva /      24 kw	40kva /       32 kw	60kva /       48 kw	80kva /     64 kw	100kva /     80 kw	120kva /     96 kw	160kva /     128 kw
features	scalable power / ups parallel ready with another of the same capacity / 100% microcontroller / redundant forced ventilation / immune to phase rotation input / dual input type input (optional)
estimated useful life	20 years
efficiency ac / ac	90%
transfer time	0 sec
design technology	true online (double conversion), inverter based on igbt's
input
voltage (*)	3x380/220 vac ± 20%
frecuency (*)	50hz ± 10%
power factor	0.8
technologie	RECTIFIER 6 PULSES
lead wires (*)	3 phases +neutral+ground
output
voltage (selectable) (*)	3x380/220 vac ± 1%
frecuency	50hz ± 0.1%
waveform type	sine wave generated by the inverter with high frequency pwm
harmonic voltage distortion t.h.d	<2%  for linear load / <5%  for non-linear load
crest factor	3  :  1
power factor	0.8						0.8
overload recovery.	automatic
isolation transformer	dry type for inverter - voltage 380v/220v
voltage regulation	± 1% for balanced load.
overload capacity (*)	125% for 12 minutes. / 150% for one minute
wires (*)	3 phases +neutral+ground
batteries
type (*)	sealed and maintenance free. technology vrla (valve regulated lead acid)
autonomy at full load (*)	5 to 15 minutes.   extended range capability.
typical recharge time.	4 hours 90%
battery management.	auto-test, adjustable battery transfer point and settings of alarm.
battery protection.	breaker protection. turn the system off when the battery is low.  battery  test. smart charger.
charger	soft start to full load. current limiter for charging batteries.
protections
hardware protection	breaker (termomagnetic) for input, output, battery(in battery case for >=100kva),fast acting  bypass fuse, fast-acting fuses in dc and bypass, fan, redundant power supply, temperature sensors, on-off switch, audible alarms.
bypass	static, solid state, automatic and uninterrupted operation manual for maintenance breaker, external bypass (optional)
emergency breaker.	local EPO and / or remote
monitoring and communications
front panel	standar: LED display voltage, current etc  optional: lcd display 240 * 128   reading electrical parameters. touchscreen. led mimic.
alarms	audible and visual alarms for non-normal conditions.
communications	rs232 serial port. "snmp-rj45" for remote monitoring (optional). gprs module for remote monitoring viacellular network (optional).
ups  conditions
temperature	0°c to 40°c
relative humidity.	0 to 95% noncondensing
audible noise	<60 db at 1.5 meters		<65 db at 1.5 meters
batteries conditions (recommended)
temperature	0°c to 25°c
relative humidity.	0 to 95% noncondensing
dimensions and weights
ups dimensions in mm (front x hight * deep)	540x1120x 620	540x1120x 620	660x1550x865	660x1650x865	690x1650x900	1100 x 1800 x 900	1100 x 1800 x 900	1200 x 1900 x 900
battery cabinet dimensions mm, depend of backup time (front x hight * deep aprox)	270x1125x 774	270x1125x 774	432x1550x897	432x1550x897	432x1550x897	800 x 1900 x 900	800 x 1900 x 900	800 x 1900 x 900
ups weight in "kg"	225	273	500	600	700	850	850	850
battery case weight in "kg".	59	59	105	105	125	240	240	240

 

Product Picture

 

 

 

 

 

Company pictures

 

 

 

 

 

 

                                                                                                       company building