ECG600G Electrocardiograph

Model:  ECG600G  

Introduction

ECG600G is an electrocardiograph collecting 12-lead ECG signal simultaneously and printing ECG waveform with thermal printing system, which features in, recording and displaying ECG waveform with manual or auto mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, case database management.

Features

1)        Operation

u  7" TFT-LCD

u  Operation mode: touch screen and function keys, simple and convenient to operate.

u  Compact and delicate design.

2)        Functions

u  Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.

u  Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).

u  Full-digital design, anti-baseline drift, AC and EMG interference.

u  Adjust the baseline automatically, optimize the print setting and choose the rhythm leads.

u  In AUTO mode, finish all operation by pressing the button once, which improves work efficiency.

u  Adopt digital signal processing technology to get high-quality ECG waveforms via AC filter, baseline filter and EMG filter of ECG signal.

u  Auto-measurement, auto-analysis and auto-diagnosis for routine ECG parameters, reduces the doctor’s burden and improve work efficiency.

u  Multiply printing formats, including 2*6+1(rhythm lead), 2*6, 3*4, 3*4+1(rhythm lead), 4*3, 4*3+1(rhythm lead), 6*2, 6*2+1(rhythm lead), rhythm 2, rhythm 3, rhythm 4, rhythm 5, rhythm 6, rhythm 7, channel record, etc.

u  Display of 3/6/12-lead ECG, "Lead off" and "Lack of paper" on one screen, and with ECG DEMO mode. Auto-check and auto-analysis for ECG parameters, ECG waveform can be recorded manually or automatically. And patient information can be stored by case database.

u  Timing print can be set to every 1/2/3/5/10/20/30/60 minutes.

u  Optional print setting, including “Print and save”(print waveform and save case), “Print no save”(only print waveform but not save case), “Save no print”(only save case but not print waveform).

u  Store up to 1000 cases, convenient for case review and statistic.

u  Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, German, Portuguese, Kazakstan and Russian) interface and report.

3)        Power supply

u  AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 8h, print for more than 2h and 190-ECG, which meets the requirements of visiting a patient at home and body examination.

u  Built-in auto-protection circuit, and automatic power off when there is no operation in appointed time.

Parameters

u  Working environment

Temperature: 5℃~40℃

Relative humidity: 25%~80%(non-condensing)

Atmospheric pressure: 700hPa~1060hPa

u  Transport and storage environment

Temperature: -40℃~+55℃

Relative humidity: ≤95%

Atmospheric pressure: 500hPa~1060hPa

u  Input mode: floating and defibrillation protection

u  Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB)

u  CMRR: >60dB, >100dB(add filter)

u  Time constant:≥ 3.2s

u  Patient leak current: <10µA

u  Calibration voltage: 1mV

u  Sensitivity: 2.5, 5, 10, 20, 40 mm/mV ±5%, standard sensitivity: 10mm/mV±2%

u  Noise level: ≤15µVp-p

u  Input circuit current: ≤50nA

u  Input impedance: ≥50MΩ

u  Sampling accuracy: 12-bit

u  Safety classification:class Ⅰ, type CF and defibrillation-proof applied part

u  Recording mode: thermal printing system

u  Paper size: 110mm(W)×20m(L)

u  Auto record: set record according to auto record format and mode, automatically switching leads, measuring and analyzing.

u  Rhythm record: set record according to rhythm record format and mode, automatically measuring and analyzing.

u  Manual record: set record according to record format, manually switching leads.

u  Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1)

u  Sampling frequency: 1000Hz

u  Polarizing voltage: ±500mV

u  EMG interference filter: 25Hz/35Hz(-3dB)

u  AC filter: 50Hz/60Hz(-20dB)

u  Paper speed:

Auto record: 25, 50 mm/s ±5%

Rhythm record: 25, 50 mm/s ±5%

Manual record: 5, 6.25, 10, 12.5, 25, 50, 100mm/s ±5%

u  Power supply:

AC: 100V~240V(50/60Hz)

DC: 7.4V/2000mAh rechargeable lithium battery

u  Fuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250V

u  Waterproof degree: IPX0

u  Working mode: continuous working

u  Dimension: 315mm(L)×215mm(W)×92mm(H)

u  Weight: 1.7Kg

Accessories

u  A lead cable

u  A limb electrode

u  A chest electrode

u  A thermal recording paper

u  A power cord

u  An earth wire

u  A user manual

Optional:

u  ECG-Sync software+USB cable

u  Disposable ECG electrode

u  Bag

u  Conductive gel

Qualification certificate

CE