Double Pumps Dialysis Machine

  Model:  MC-JHM-2080

MC-JHM-2028 function
Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultrafiltration project.Touch screen was equipped and it can show Naand UF profiles;In addition,the functions ie.backup power supply, Kt/V,HCO3adjustment,single needle,acetate treatment,pyrogen filter port and net connection ect.are optional.

1. Volume (length× width ×height): 370mm×340mm ×1570mm
2. Weight: about 90kg
3. Power supply voltage: AC220V/110V 50HZ / 60 HZ ,Power: 1500W
4. Blood pump/spare pump:Flux: 15 ~ 340ml/min (D 6mm)20 ~ 460 ml/min (D 8mm)
5. Heparin pump:Flux: 0ml/h~10ml/h(±5%)
Precise: 0.1ml/h Injector size: 20ml/30ml/50ml 10ml/20ml/30ml (selectable)

6. Arterial pressure: display scope: 300mmHg~+300mmHg (±10mmHg)
7. Venous pressure: display scope: 50mmHg~+300mmHg (±10mmHg)
8. Dialysate flow:300ml/min~800ml/min linearity adjustable (+10%) (5%)
Temperature:35.0℃~39.0℃
Resolving rate:0.1℃
Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm)

 9. UF flow scope: 0~1800ml/h(±30ml/h ) 0~4000ml/h(optional)

10. ISO UF flow scope:0~2000ml/h(±30ml/h)
11. TMP: Scope:100mmHg~+600mmHg (±20mmHg)
12. Blood leakage monitor:over 1ml blood per liter dialysate (flow:500ml/min)
13. Blood level monitor: ultrasonic sensor
14. Air bubble monitor: Infrared and response threshold value:
     Single air bubble of 200 uI exists when Blood flux is 200ml/min

 15. Inflow pressure:0MPa~0.6MPa

16. Inflow temperature: 5℃~30℃
17. Environment temperature: 10℃~30℃,Relative humidity≤70%
18. Rinse/disinfection: chemical disinfection (citric acid,peracetic acid and oxalic acid)
19. Hot rinse: 80℃
20. Back-up power supply: last for 15-30min after electric-cut.

Clinical Application
--- Hemodialysis Therapy:same as JH-2000
--- Pure ultrafiltration Therapy: same as JH-2000
--- Hemoperfusion Therapy:same as JH-2000
--- Plasma exchange Therapy:same as JH-2000
--- Na+and UF profiling

 Be applicable for reducing the cases during dialysis treatment such as low/high pressure,muscle convulsion, headache,nausea,vomit ect.

--- Kt/v  function:
The sufficiency of dialysis can be reflected by Kt/V.
---HCO3 adjustment function:
Be applicable for sericous acid toxicosis patient.
Be capable to calibrate the acid toxicosis status according to patient's state of illness.
--- Backup power-supply:
It can last for 15-30 minutes after power cut off.
--- Pyrogen filter port:
Completely filtrating the remained bacteria and endotoxin.(optional)
--- Net connection:
One computer can audit and control the treatment of maximum 20 units