Name: MCS-GS-250/350 Hot Bead Sterilizers
Brand: Mecan
Availability: InStock

Product Details

MCS-GS-250/350 Hot Bead Sterilizers

Model: MCS-GS-250/350

Well Diameter: 4cm

This sterilizer provides a safe, effective and convenient method for sterilizing your surgical instruments prior to surgery or tissue culture. Without using potentially dangerous gases, flames or chemicals, you can ensure that your instruments will be free of pathogens and microbial contaminants.

The beads take 15-20 minutes to reach 240°C to 270°C (464°F to 518°F), and then the sterilizer is ready for use. The temperature is thermostatically maintained, and the unit can be left on all day. Instruments require approximately 20 seconds of contact with the beads for complete sterilization. The sterilizer is safe to use even in laminar flow hoods. Instruments not included.

INSTRUCTIONS FOR HOT BEAD STERILIZER

Fill sterilizer well with glass beads provided to within 3 mm below rim.
Insert electrical plug into wall socket. DO NOT cover well with lid. Switch unit on. It will take 15 to 20 minutes to reach operating temperature of approximately 240 C to 270 C.
Carefully insert the working part of clean surgical instrument into well after unit has reached operating temperature and leave for 10 to 20 seconds. Do not leave longer as instruments become too hot to handle. Sterilization is on contact with glass beads, so tubes (cannulae) cannot be sterilized effectively.

Unit can be left in the “ON” position all day and is safe for use in laminar flow cabinets.
Only when unit is switched off and cool, cover with lid to reduce dust accumulation. Do not cover with lid when unit is hot. Should unit overheat and trip safety switch, let it cool off completely, then turn it over and push in red button visible inside the unit as viewed through one of the cooling holes.
The glass beads should be cleaned routinely and replaced in a dry state.

Beside MCS-GS-250/350 Hot Bead Sterilizers,we offer series Autoclave Sterilizer Equipment.

One Stop Supplier

Our Advantage

1. One stop supplier for medical equipments and laboratory equipments in Guangzhou
2. More than 2000 hospitals have become our partners
3. Superior quality with factory price
4. Quick reply and considerate service
5. CE,ISO,FDA Certificate
6. Fast delivery by air, sea or in other ways
7. More than 10 years in medical machines supply business
8. Exported to more than 109 countries
9. Warranty time: AT LEAST 12 months and Over 8 years' technical and accessories-change support
10.Excellent and immediate after-sale service

Together with client

We have sold MCS-GS-250/350 Hot Bead Sterilizers and other medical equipment to more than 109 countries and built long term partnerships with clients such as UK, US, Italy, South Africa, Nigeria, Ghana, Kenya, Turkey, Greece, Philippines, etc

Testimonials

1. From the Biomedical Engineer of Senegal.

hello, the installation of the RX unit was a success. all is ok and i have a very good picture.

THANK YOU

2. From Dr. Salman Hasan, Doctor from Nigeria

Hello we have installed the radio and we are really satisfied with its operation.

3. From Dr. Emma Adapoe, Ghana, Africa.

Mecan Medical Company Limited:

I have tried them for their honesty

I have tested their products for Good Quality

I have experienced their Good and and nice service and customer relations

I endorse Mecan because they stand the test of time.