Specifications
Separated pressurized water tank, can be inside the room*Pressurized water tank adapt the advanced technology of ENAMEL material in the inner tank;
* For 100 L to 250 L water tanks, the electrical heater is 1.5KW, for 300 L to 500L water tanks, it is 2.5KW.
* For copper coils, if equip with 1 copper coil, it is lower one, and it comes with 15m long for 100L and 150L, 18m for 200L to 350L water tanks, 20m for 400L to 500L water tanks; if equip with 2 copper coils, then for upper ones, it is 10m for 200L to 350L water tanks, and 12.5m water tank; there's only one copper coil for 100L and 150L water tank. The copper coils are φ16mm* 1.0mm in thickness.
* The Mg bar, P/T valve, electrical heater and draining valve are included in the water tank.
* The rated pressure of the inner tanks is 0.6Mpa;
* The connecting size of the water pipe is G3/4;
* Recommended temperature control range:30 oC -70oC;
Ø Features (for Porcelain Enamel Inner Vessel):
1) Rust-free and scale resistance. The special silicone coated on the steel inner vessel can separate water from steel plate, so it is featured with Rust free, high strength, and resistance to corrosion by chlorine ion.
2) New technology and new material. A special silicone is coated on the inner vessel by the newest German process techniques. After baked at 900 oC, it is melted and integrated with the steel wall of the inner vessel, thus the steel inner vessel with extra protective function is made.
3) No seaming and leaking. The vessel is formed by integral drawing from special type thickened material, so the service life is much longer.
