Product Details

25 year aluminum profile manufacturer, 6060 6061 6063 6082 grade aluminium profile

We already have more than 30 countries aluminum window and door extruion moulds, contact us to check your markt.

Free dies for new client, please email us for details.

Our factory was founded in 1994. Our assets reach 800 0000 Dollar. Have 3000 window and door aluminium profile designs for 30 different country markets, have 600 different deinges for heat sink. can supplier 3000 tons every month for aluminum profiles.

1) Thermal aluminium profile

If your profile require good quantity, We will do free moulds for you.

2)Aluminium Profile Alloy

6063 T4/T5

6061 T5/T6

6060 T6

6082 T6

6463 T5 For polishing

7075 T6

3)About Alloy 6063

Corresponds to the following standard designations and specifications aluminium profile :

AA6063	Al Mg0.7Si
GS10	AlMgSi0.5
A-GS	3.32206
ASTM B210	ASTM B221
ASTM B241 (Pipe- Seamless)	ASTM B345 (Pipe- Seamless)
ASTM B361	ASTM B429
ASTM B483	ASTM B491
MIL G-18014	MIL G-18015
MIL P-25995	MIL W-85
QQ A-200/9	SAE J454

4)About aluminium profile Alloy Composition

Alumin um Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurity	Al
6063	0.2-0.6	<0.35	<0.1	<0.1	0.45-0.9	<0.1	<0.1	<0.1	<0.15	Rest
6063A	0.3-0.6	0.15-0.35	<0.1	<0.1	0.6-0.9	<0.05	<0.15	<0.1	<0.15	Rest
6061	0.4-0.8	0.7	0.15-0.4	<0.15	0.8-1.2	0.04-0.35	<0.25	<0.15	<0.15	Rest
LTF21	<0.6	<0.7	<0.2	1.0-1.5	<0.05		<0.1	<0.15	<0.1	Rest
6005	0.6-0.9	<0.35	<0.1	<0.1	0.4-0.9	0.1	<0.1	<0.1	<0.15	Rest

Typical mechanical properties for aluminium profile

Aluminum Grade	Temper	Wall Thickness	Resist Pull Point(Mpa)	Stretch (Rpo.2 Mpa)	Stretch Rate	Webster Hardness
6063	T5	All	160	110	8	8
6063	T6	All	205	180	8
6063A	T5	=<10	200	160	5	10
6063A	T6	>10	230	190	5
6061	T4	All	180	110	16
6061	T6	All	265	245	8
LTF21	O,H112	All	=<185	260	16
6005	T5	=<3.2	260	240	8
6005		>3.2-25	260	240	10

We have more than 30 countries moulds for aluminium profiles used in window and doors.

5) About Us

We are one of the largest manufactuers aluminium profile in south of China, We were found on 1994, and have more than 3000 desgins in hand , exported over more than 30 countries..

Our Service for all client are :

Service Time : 7*24 hours total 365 days. (You can call or email us anytime, And we will reply you within 1 or 2 hours.

Quality: Approval SGS, BV test

Free dies for new client, please email us for details.

Thank to our client support in the past ten years and welcome you join us, special for aluminium profile.

Contact us, We will reply you at once.