Product Details

1) CNC machining aluminum

We will do free moulds for you if the quantity is ok.

2) CNC machining aluminum Alloy

6063 T4/T5

6061 T5/T6

6060 T6

6082 T6

6463 T5 For polishing

7075 T6

3)About CNC machining aluminum Alloy 6063

Corresponds to the following standard designations and specifications:

AA6063	Al Mg0.7Si
GS10	AlMgSi0.5
A-GS	3.32206
ASTM B210	ASTM B221
ASTM B241 (Pipe- Seamless)	ASTM B345 (Pipe- Seamless)
ASTM B361	ASTM B429
ASTM B483	ASTM B491
MIL G-18014	MIL G-18015
MIL P-25995	MIL W-85
QQ A-200/9	SAE J454

4)About Aluminium Section Alloy Composition

Alumin um Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurity	Al
6063	0.2-0.6	<0.35	<0.1	<0.1	0.45-0.9	<0.1	<0.1	<0.1	<0.15	Rest
6063A	0.3-0.6	0.15-0.35	<0.1	<0.1	0.6-0.9	<0.05	<0.15	<0.1	<0.15	Rest
6061	0.4-0.8	0.7	0.15-0.4	<0.15	0.8-1.2	0.04-0.35	<0.25	<0.15	<0.15	Rest
LTF21	<0.6	<0.7	<0.2	1.0-1.5	<0.05		<0.1	<0.15	<0.1	Rest
6005	0.6-0.9	<0.35	<0.1	<0.1	0.4-0.9	0.1	<0.1	<0.1	<0.15	Rest

Typical mechanical properties for CNC machining aluminum

Aluminum Grade	Temper	Wall Thickness	Resist Pull Point(Mpa)	Stretch (Rpo.2 Mpa)	Stretch Rate	Webster Hardness
6063	T5	All	160	110	8	8
6063	T6	All	205	180	8
6063A	T5	=<10	200	160	5	10
6063A	T6	>10	230	190	5
6061	T4	All	180	110	16
6061	T6	All	265	245	8
LTF21	O,H112	All	=<185	260	16
6005	T5	=<3.2	260	240	8
6005		>3.2-25	260	240	10

5) About Us

We are one of the largest manufactuers CNC machining aluminum in south of China, We were found on 1994, and have more than 3000 desgins in hand , exported over more than 30 countries..

Our Service for all client are :

Service Time : 7*24 hours total 365 days. (You can call or email us anytime, And we will reply you within 1 or 2 hours.

Quality: Approval SGS, BV test

Free dies for new client, please email us for details.

Thank to our client support in the past ten years and welcome you join us.