Specifications

Detailed Product Description

The pipe can be fed in automatically or manually when the beveling machine works and the pipe can be removed from the machine

Pipe Logistics Transport System for Bevel Cutting Machine

           Model: PLTPS-24D1/D2

           Performance features

           The pipe can be fed in automatically or manually when the beveling machine works and the pipe can be removed from the machine with a turnover mechanism if necessary.

           It increases the automatization program in the prefabricating plant and decreases the hazards during lifting and mounting the machine.

           Technical parameters

           Pipe diameter applicable: DN50∼600(φ60∼610)

           Conveying length: ≥1,000MMat inlet; ≥500MM at outlet

           Line length: 8M at inlet and 7M at outlet (or depend on situation). .

           Line height: 800MM

           Material of the roller bed: carbon steel with blue treated surface (coated with rubber if necessary)

          Conveying speed: 2∼20M/Min

          Speed-regulation Mode: manual/VF stepless speed adjustment

          Control system: Manual/PLC control, shared with the pipe cutting length-fixing system (or depend on the situation).

          Turnover mechanism: Nil (or depends on the situation)

          Lifting system: a lifting system could be equipped if required so as to adjust the center elevation of pipes automatically and to bevel the pipes of the different diameter.

Photo: