Specifications

Conveying the pipe when the end beveling machine works,and the pipe can be removed from the machine with a turnover mechanism

1. Pipe Conveying System for Pipe End Beveling Machine

u  Model No. : PLTPS-16B2/24B2/32B2;

u  Principle Of Operation:

• When after the pipe roll into roller conveyor, driving roller by electric motor & sprocket chain, push pipe forward via friction force of roller.
• Elevate & lower height of roller conveyor by worm wheel screw lifter, so as to conveying pipe go into clamping device exactly
• When rolling the pipe to proper position, and proceed to lifting & turning by worm wheel screw lifter.

u  Composition brief

• The whole of pipe roller conveying system consist of steel structure frame, roller set, lifting device, lifting & turning device, and gearing of sprocket chain etc.
• Lifting device consist of electric motor, worm wheel screw lifter and gearing of sprocket chain etc.

u  Performance features:

• Conveying the pipe automatically or manually when the end beveling machine works and the pipe can be removed from the machine with a turnover mechanism if necessary
• It is improving automatization level in the pipe fabricating plant and decreases the hazards during hoisting.

u  Technical Parameters:

• Pipe Diameter: DN50-400 (φ60-426); DN50-600 (φ60-630 ); DN200-800 (φ219-830)
• Conveying Length: ≥500mm
• Linear Length: 7.5M or 12 M or as per request
• Linear Height: 800mm
• Material Of Roller: carbon steel coated with rubber
• Conveying Speed: 2-20m/min
• Speed-regulation Mode: VF stepless speed adjustment
• Controlling System: Remote Controlling
• Lifting system: a lifting system is equipped so as to adjust the center elevation of pipes automatically and accommodate to bevel machining for different pipe diameter.
• Turning system: a turning system is equipped so as to turn pipe automatically and to bevel the two end of pipe (option). When after finished bevel one end lifting the pipe and the pipe turning 180 °for another end beveling
• Input voltage : 380V/ 415V/440V/3Ph-50/60Hz or as per request and pls notice.
•