MODEL

TN-3000-112

OUTPUT

RATED POWER (Typ.)

3000W

MAXIMUM OUTPUT POWER(Typ.)

3450W for 180 sec. / 4500W for 10 sec. / surge power 6000W for 30 cycles

AC VOLTAGE

Factory setting set at 110VAC

100 / 110 / 115 / 120VAC selectable by setting buttonS.W

FREQUENCY

60 ±0.1Hz   50/60Hz selectable by setting buttonS.W

WAVEFORM        Note.2

True sine wave (THD<3%) at rated input voltage

AC REGULATION (Typ.)

±3.0%

TRANSFER TIME (Typ.)

10ms inverter→ by pass

SAVING MODE (Typ.)

Default disabled. Load≤5W will be changed to standby mode

FRONT PANEL INDICATOR

Battery voltage level, output load level, saving mode, fault and operation status

INPUT

BAT. VOLTAGE

12V

VOLTAGE RANGE (Typ.)   Note. 3, 6

10.5 ~ 15VDC

DC CURRENT (Typ.)    Note.4

300A

NO LOAD DISSIPATION(Typ.)

≤10W at standby saving mode

OFF MODE CURRENT DRAW(Typ.)

≤1mA

EFFICIENCY (Typ.)     Note.1

88%

BATTERY TYPES

Open & sealed Lead Acid

BATTERY INPUT PROTECTION

FUSE

40A*12

BAT. LOW ALARM    

11.3V

BAT. LOW SHUTDOWN 

10.5V

REVERSE POLARITY

By internal fuse open

OUTPUTPROTECTION

OVER TEMPERATURE

90°C ± 5°C

Protection type : Shut down o/p voltage, re-power on to recover

OUTPUT SHORT

Protection type : Shut down o/p voltage, re-power on to recover

OVER LOAD (Typ.)

105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.

Protection type : Shut down o/p voltage, re-power on to recover

CIRCUIT BREAKER

AC output: 40A, AC receptacle:15A

GFCI PROCTECTION

Optional (Only type F)

ENVIRONMENT

WORKING TEMP.   Note.1

0~+40°C at 100% load   60°C at 50% load

WORKING HUMIDITY

20%~90% RH non-condensing

STORAGE TEMP., HUMIDITY

-30~+70°C / -22~ +158 F, 10~95%RH

VIBRATION

10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY&EMC

SAFETY STANDARDS

UL458 (only for Type G )

LVD

None

WITHSTAND VOLTAGE

Bat I/P - AC I/P:3.0KVAC     Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC

ISOLATION RESISTANCE

Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25¢J/ 70% RH

EMC EMISSION

Compliance to FCC class A

EMC IMMUNITY

None

AC

CHARGER

CHARGE CURRENT (Typ.)

25A

CHARGE VOLTAGE Note.6

14.3

SOLAR

CHARGER

MAX OPEN CIRCUIT VOLTAGE

25V

SHORT CIRCUIT CURRENT (max.)

30A

OTHERS

CONTROL WIRING

RJ11 -RS232 (Option)

DIMENSION

466.8*283.5*100mm (L*W*H)

PACKING

12.9Kg; 1pcs/14Kg/1.98CUFT

NOTE

1. Efficiency is tested by 2100W, linear load at 13V, 26V, 52V input voltage.

2.Output derating capacity referenced by curve 1.

3.Input derating capacity referenced by curve 2.

4.DC current is tested by 3000W, linear load at 12V, 24V, 48V input voltage.

5.All parameters not specified above are measured at rated load, 25°C of ambient temperature.

6. The tolerance of each voltage value by models is:112/212 →±0.5V;124/224 →±1V;148/248 →±2V