Shanghai red letter insulation waterproof material co., LTD

   The first part Outlines

4200 chemical grouting electric pump is electric airless diaphragm pump, it is used for one-component grouting and spraying operations. The pump by imported from Italy, excellent performance, durable.

4200 chemical grouting electric pump has the following features:

L will move; Strong, easy to carry and maintenance;

L can work under tough conditions, including high temperature;

L when over electric power safety bear ability, pump system that can automatically stop;

              The second part of technical characteristics

2.1 overview

All steel structure, the pump body of aluminum alloy

2.2 technical characteristics

        The machine part

BOX BRING TOOLS

ATTACKS SUCTION SIPHON

PRESSURE GAUGE

ATTACK PIPES FOR AIRLESS SPRAY GUN

RETURN TAP

SWITCH POWER LINE

PRESSURE REGULATOR

 Model S

Dynamic type
Single-phase ac power supply (220 V / 50 hz)
Rated power
1 HP (0.75 kw)
The weight of the
About 20 kg
size
500 x350x550 mm
The maximum working pressure
220 bar
The intensity of electric current
6 A
The pumping efficiency
3.5 Lt/min
Fluid hose length
30 mt
Size, the largest nozzle
Micro 0.023 "(inches)

  2.3 devices 

This machine, complete sets of equipment with the following equipment:

L siphon suction paint equipped with filters and suction and return pipe

L link pipe spray gun

Normal gun or adjustable nozzle * l

L nozzle fixed or self-cleaning gun *

L prolong gun * *

L the release of the suction valve tool (optional)

L set key (optional)

* instruction needs

* * required length 0.5 or 1 meter (50 cm)

The third part of an instruction

3.1 use machine preparation (see below)

Suction System

Airless Pump

Airless spray gun

HP Hose:HP

L make the appropriate connection siphon tend to pump body.

L fasten spray gun and adduction tube.

L connect adduction tube tend to pump body.

L tend to the gun nozzle.

3.2 connect the power cord

3.3 launch

L keep tend to inhale siphon paint cans in front of the return line.

L make tend to pump at the top of the main lever and attract GuanPing line

3.4 spraying

L hold a gun, press the trigger, in the final hope, adjust the direction.

3.5 adjust the movement

L movement of the pressure, from the table shows that can be adjusted to the largest 230 (version of S, M) and 240 version (l), through the pressure regulator on the pump body to adjust.

3.6 adjust the injection

L would be expected to adjust injection adjustment ring on the gun (only applicable to adjustable spray gun version).

3.7 stop and go out

L make bibcock with lever tilt - mainly on the top of the pump suction GuanPing line from the top pump pressure relief

L stress movement to keep pressure regulator operation

L turn switch in position 0

3.8 voltage interruption after reconstruction

Machine has equipped to deal with unexpected voltage interruption safety protection. In one thousand, in case of unexpected voltage interruption, please repeat the boot process.

The fourth part of the safety instructions

Important: before use, please read and understand the safety precautions

5.1 pumping material if the injection into the skin, can cause damage, don't take the injection head to any part of the body.

5.2 if there are any parts need to clean or loading and unloading, must turn off the power supply and relieve internal pressure pump.

5.3 ensure power supply stable work, must be grounded.

5.4 before the operation, must understand the safety performance of material pumping.

5.5 ensure accessories, such as high pressure tube, connector, etc., can work under the pressure.

The fifth part maintenance instructions

Ban cleaning when the machine is running, maintenance and lubrication parts;

L ensure that during the cleaning/maintenance machine not connected power supply;

L pump body can be washed with water;

L pump at the top, the pipe and the nozzle, please use special-purpose detergent to clean.

The sixth part of the common troubleshooting methods