High pressure pipe

      High pressure pipe is a kind of pressure can be displayed, and use the pipeline transportation of liquid, it's a lot of more phyletic, steel, brass, stainless steel pipe, and so on.

  We are currently in use of high pressure pipe can be arbitrary Angle transformation, it is soft, because it is high pressure, must have its special material, and its danger, the following is a high pressure pipe material and use of the guide.

                    Material:
  1. Inner tube: nylon

  2. Coating: polyurethane

Made by nylon material: high pressure infusion tube diameter: 1/8 diameter, working pressure: 0.339 4500 burst pressure: 18000 bending radius: 1/2

                       Method of use:

In order to make the high pressure pipeline can be functional, hope to be able to follow the directions.

1. Before use must check whether there are different shapes, such as the exterior deformation, joint compaction and double spring (rubber) must set up the joint, (this spring (rubber) is to protect the most vulnerable of high pressure pipe joint) can be avoided when you receive a tube into the remains of 90 degrees or 90 degrees, when using easy leaking pipes or agent.

2. Took over pay special attention to not too tight, lest damage deformation and damage lead to leak agent structure, so can't use.

3. Must first test, when used for the first time (that is, check the pressure of high pressure pipe) (A). The red check 15000 psi pressure tube.

(B). Clarinet check 8000 psi pressure, when pressure is increased to 15000 psi (A) or (B) stop 8000 psi, the pressure of about 2 minutes to 5 minutes and then check whether there is A different shape, such as stomach, leak agent, tube, if these are normal, does not occur if there is abnormal phenomenon, it can not use high pressure pipe, and prohibited from use, should be returned to the seller or the company, one of them.

4. Normal working pressure red tube 10000 psi (B) (A) builders clarinet security ban on more than 5000 psi range, must wear safety helmet, mask, and safety work clothes, in case one thousand, because there is no absolute safety, each product also involves techniques and reaction of operators and products throughout the life cycle, use of time, the stability of the machine.

5. High pressure pipe although there is no does not mean that it is a good, long, long time, it will be aging, relative to its pressure is low, safety, it is time to change the new.

                  Maintenance and storage:

1. High pressure pipe maintenance is very simple, as long as tube residual cleaning detergent (methanol) continuous cycle back and forth, until sure after cleaning, then clean with clean detergent, tube had better leave some detergent, prevent in one thousand not to wash, and tube.

2. Cleaning of high pressure pipe, can be folded in half and banned because damage structure, so it is recommended to use round type

3. Perfusion rubber mat 5 grains

4. Metado sb560 practice (220 v)

5. A group of maintenance tools

6. A filter