CR Sheet cutting machine
USD $10,000 - $100,000 /Set
Min.Order:1 Set
Shanghai Trihope International Co., Ltd.
CR Sheet cutting machine
1.General information | |
1.1.Input Material | |
Application | Cold rolled steel coil, Galvanized steel coil, etc |
Thickness | 0.3mm to 1.8mm |
Width | 400mm to 1000mm |
Coil ID | 508mm |
Coil OD | ≤1500mm |
Coil weight | 10Ton Max |
1.2 Products | |
Sheets length | 500mm ~ 5000mm |
Stacking Height | Max 400mm |
Stacking weight | Max 5000kg |
1.3 Performances | |
Tolerances | +/-0.3mm/1000mm |
Diagonal difference | +/-0.6mm/1000x1000mm |
Flatness | 1.5mm/m2 |
Line speed | 18 to 20 pcs/min (in 2000mm length) |
1.4 Overall | |
Total Power | Abt.50kW |
Area occupation | 25x5m |
Paint Color | Accodring to customer's request |
2. Line configuration and specification | |
Entry Coil Car | |
Uncoiler | |
Leveler | |
Loop table | |
Side guide | |
Servo feed | |
Shear | |
Transfer Belt | |
Stacker | |
Stacking table | |
Exit conveyor | |
Hydraulics | |
Electrical Control | |
2.1 Entry Coil Car | |
V-shape frame | Raised / lowered by hydraulic cylinder; The hydraulic |
Roll Material | 9Cr2Mo. |
Cylinder specification | Ø150X700mm |
Motor drive | Moving along the rail |
The motor | AC1.5kw-6P |
2.2 Uncoiler | |
4 drum segments; Expansion /collapse promoted by hydraulic cylinder; | |
Drum expansion /collapse range | Ø465~515mm; |
The hydraulic cylinder specification | Ø150X145mm |
The drum driven by AC motor; Pneumatic clutch. | |
The drum’s main shaft installed with Air brake for tension and brake. | |
The hold down roll installed over the drum, be raised/lowered by hydraulic cylinder; | |
Hold down roll coated with PU. | |
2.3 Leveler | |
A pair of pinch roll, PU coated; diameter Ø150mm | |
2H type, 13 work rolls with DIA Ø95mm | |
Work rolls material GCr15 | |
Hand wheel leveler gap adjustment. | |
AC motor drive by means of Universal joint shafts | |
Motor Power AC18.5kW w/t frequency inverter control | |
Welded steel frame, precision machined after annealing. | |
3. Main Parts supplier | |
Item | Supplier |
1 Gear box | Changzhou Guomao, China |
2 AC Motor | WN motor, China |
3 Servo Motor | Panasonic,Japan |
4 Precision gear box | For Servo motor |
5 Main Bearings | (Leveler, Feed Rolls)NSK |
6 Hydraulic cylinders | Gaoxin Huaneng, China |
7 Pump | Yuken, Taiwan |
8 Valves | Yuken, Taiwan |
9 Air cylinders | Airtech |
10 PLC | MITSUBISHI MELSEC,Japan |
11 HMI | WeinView,Taiwan |
12 Frequency Invertor | Omron,Japan |
13 Servo Control | Panasonic,Japan |
14 Sensors | Omron,Japan |
15Touching screen | WeinView, Taiwan |
1
Shanghai TRIHOPE International Co., Ltdwas registered in Shanghai China in the year of 2003. Its total investment is about USD 2 Million. Being a professional foreign trading company, TRIHOPE is also the marketing institute of its sister company M/s SENERGE Electric Equipment Co., Ltd,which is a professional equipment manufacturer.
SENERGE Electric Equipment Company (SENERGE) was established in 2009, located in Shanghai Zhang Jiang Pinghu Hi-Tech Zone. The total investment of SENERGE is more than 5 million USD. SENERGE has full range of good machines and tools to ensure its machining process and offer customer good quality products.
More than 35 years working experience of design and manufacturing in transformer industry. Served as tranformer and transformer equipment design and technology in Shanghai Transformer Factory, ALSTOM, AREVA, and other domestic transformer factories.
With 35 years working experience in transformer industry. Served as transformer manufacturing in Shanghai Transformer Factory, ALSTOM, AREVA, and other domestic transformer factories.
Master degree of enigneering. 25 years working experience. Once worked in Pakistan, Indonesia overseas factories; visited nearly 40 countries, traveling throughout Africa, South America, America, Oceania, Asia and other places, with a wealth of experience working overseas.