Specifications
Sure LDG electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewaterSPECIFICATIONS
Power Supply: 85-265Vac (Optional: 18-36 Vdc)
Power Consumption: 10W
Accuracy:
± 0.5% accuracy of rate from 0.3-10 m/s
± 1.0% accuracy of rate from 0.1-0.3 m/s
Repeatability: 0.2%
Minimum Fluid Conductivity:
5.0 micromhos/cm
Flow Direction: Unidirectional or bidirectional, 2 separate totalizers (programmable)
Analog Outputs: 4-20mA, 500ohms Max Load
Output Frequency: Scaled Pulse output, (open collector) Max 5Khz
Noise Damping: Programmable
Pulse Width: Programmable up to 500ms
Zero-point Stability: Automatic correction
Housing: Cast aluminum, powder coated paint
Mounting: Integral mount or remote mount
Ambient Temperature: -4 to 140° F (-20 to 60° C)
Detector:
Flow Range: 0.03-10 m/s
Sizes: 10 to 2200 mm
Min. Conductivity: 5 micromhos/cm
Accuracy:
± 0.5% accuracy of rate from 0.3-10 m/s
± 1.0% accuracy of rate from 0.1-0.3 m/s
Electrode Materials:
Standard: SS316L
Optional: Tantalum
Liner Material: PTFE, FEP (Rubber), PO
Fluid Temperature:
PTFE: 100°C Standard (Customized: 180°C)
FEP: 60°C
Pressure Limits:
1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa
Coil Power: Pulsed DC
Ambient Temperature: -20°C to 60°C
Pipe Spool Material: 316 Stainless Steel
Meter Housing Material:
Carbon Steel welded
Flanges:
Carbon Steel - Standard (ISO 7005-1)
304 Stainless Steel - Optional
Optional Stainless Steel Grounding Rings
