Specifications

Sure LDG electromagnetic flow meters are intended for fluid measurement in most industries including water, wastewater

SPECIFICATIONS

 

Power Supply: 85-265Vac (Optional: 18-36 Vdc)

Power Consumption: 10W

Accuracy:

± 0.5% accuracy of rate from 0.3-10 m/s

± 1.0% accuracy of rate from 0.1-0.3 m/s

Repeatability: 0.2%

Minimum Fluid Conductivity:

5.0 micromhos/cm

Flow Direction: Unidirectional or bidirectional, 2 separate totalizers (programmable)

Analog Outputs: 4-20mA, 500ohms Max Load

Output Frequency: Scaled Pulse output, (open collector) Max 5Khz

Noise Damping: Programmable

Pulse Width: Programmable up to 500ms

Zero-point Stability: Automatic correction

Housing: Cast aluminum, powder coated paint

Mounting: Integral mount or remote mount

Ambient Temperature: -4 to 140° F (-20 to 60° C)

Detector:

 

Flow Range: 0.03-10 m/s

Sizes: 10 to 2200 mm

Min. Conductivity: 5 micromhos/cm

Accuracy:

± 0.5% accuracy of rate from 0.3-10 m/s

± 1.0% accuracy of rate from 0.1-0.3 m/s

Electrode Materials:

Standard: SS316L

Optional: Tantalum

Liner Material: PTFE, FEP (Rubber), PO

Fluid Temperature:

PTFE: 100°C Standard (Customized: 180°C)

FEP: 60°C

Pressure Limits:

1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa

Coil Power: Pulsed DC

Ambient Temperature: -20°C to 60°C

Pipe Spool Material: 316 Stainless Steel

Meter Housing Material:

Carbon Steel welded

Flanges:

Carbon Steel - Standard (ISO 7005-1)

304 Stainless Steel - Optional

Optional Stainless Steel Grounding Rings