Wafer Turbine Flow Meter
USD $200 - $1,000 /Set
Min.Order:1 Set
Tianjin Sure Instrument Science & Technology Co., Ltd.
1.Diameter:4--200mm Connection: flange/thread
2.Material of Meter:
Shell (304 staniless steel) Core(high quality aluminum alloy)
3.output signal:
4-20mA/pulse signal/RS485/HART Communication
4.power supply :lithium battery/24vDC
Performance:
Repeatability: ±0.2%
Accuracy: Standard: ±1% of reading;
Optional: ±0.5% of reading
Wetted Components:
Housing: Standard - 304 Stainless Steel
Optional - 316 Stainless Steel
Bearings and Shaft: Tungsten Carbide
Rotor: Standard - 2Cr13 Stainless Steel
(Optional Alloy CD4Mcu)
Retaining Rings: 316 Stainless Steel
Output Signal: (Where applicable)
Sensor: Pulse signal (Low Level: ≤0.8V; High Level: ≥8V)
Transmitter :4 to 20 mA DC current signal
Signal Transmission Distance:≤1,000 m
Electrical Connections:
Basic Type: Hausman Connector or three-core cable
Explosion Proof Type: ISO M20×1.5 Female
Explosion Proof Level:
Standard: None
Optional: ExdIIBT6
Protection Level: IP65
Ambient:
Temperature: -10°C to +55°C
Pressure: 86 to 106 Kpa
Relative Humidity: 5% to 90%
Power Supply:
Sensor: +12V DC (Optional: +24V DC)
Transmitter: +24V DC
Field Display Type B: Integral 3.2V Lithium Battery
(Others available on request)
Field Display Type C: +24V DC
Fluid Temperature and Pressure:
Temperature: -20°C to +110°C
Pressure: Fluid pressure should be limited according to rating.
Measurable Flow Rate Range and Pressure Level: (See table 1)
Table 1. Measurable Flow Rage Range and Pressure Rating
Nominal Diameter | Standard Flow Range (SFR) | Extended Flow Range (EFR) | Standard Pressure Rating | Customized Pressure Rating | |
(mm) | (in.) | (m3/h) | (m3/h) | (MPa) | (MPa) - Flange Fitting |
4 | 0.15 | 0.04 to 0.25 | 0.04 to 0.4 | Thread: 6.3 | 12, 16, 25 |
6 | 0.25 | 0.1 to 0.6 | 0.06 to 0.6 | Thread: 6.3 | 12, 16, 25 |
10 | 0.4 | 0.2 to 1.2 | 0.15 to 1.5 | Thread: 6.3 | 12, 16, 25 |
15 | 0.5 | 0.6 to 6 | 0.4 to 8 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
20 | 0.75 | 0.8 to 8 | 0.45 to 9 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
25 | 1 | 1 to 10 | 0.5 to 10 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
32 | 1.25 | 1.5 to 15 | 0.8 to 15 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
40 | 1.5 | 2 to 20 | 1 to 30 | Thread: 6.3; Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
50 | 2 | 4 to 40 | 2 to 40 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
65 | 2.5 | 7 to 70 | 4 to 70 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
80 | 3 | 10 to 100 | 5 to 100 | Flange: 2.5 | 4.0, 6.3, 12, 16, 25 |
100 | 4 | 20 to 200 | 10 to 200 | Flange: 1.6 | 4.0, 6.3, 12, 16, 25 |
125 | 5 | 25 to 250 | 13 to 250 | Flange: 1.6 | 2.5, 4.0, 6.3, 12, 16 |
150 | 6 | 30 to 300 | 15 to 300 | Flange: 1.6 | 2.5, 4.0, 6.3, 12, 16 |
200 | 8 | 80 to 800 | 40 to 800 | Flange: 1.6 | 2.5, 4.0, 6.3, 12, 16 |