Product Details

1 10/100M RJ45 port industrial Din-rail switch

Overview

Foway FC540A series is a single port Ethernet media converter , which can implement mutual conversion between10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. Foway FC540A series media converter provide 2 RPS (Redundant power supply) input : 9.6 ~ 60 VDC and 18 ~ 30VAC , it can be connected to a DC or AC power supply. Besides, Foway FC540A series can work under the -40 ~ 75°C , With IP30 environmental protection grade, suitable for any industry .Foway FC540A series with the DIP switch , can enable or disable broadcast storm protection, for different industrial applications provide another flexible solution

Character

l RJ45 port 10 / 100M adaptive, with MDI and MDI-X auto recognition, automatic detection, automatic learning, good compatibility

l provide 2 RPS (Redundant power supply) input : 9.6 ~ 60 VDC and 18 ~ 30VAC

l Provide reverse polarity protection

l Support maximum 1552 byte long data packet transmission

l Side of the DIP switch dial 1 is enabled broadcast storm, dial the disabled broadcast storm

l With rugged metal housing IP30

l Support rails or distribution cabinet installation

Technical Specification

Parameters	Specifications
Access mode	10/100Mbps
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE 802.3x Flow Control,IEEE802.1d Spanning Tree,IEEE802.1q vlan,IEEE802.1p Qos
Wavelength	850nm/1310nm/1550nm
Transmission distance	Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km;single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pairs: 100m
Port	One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125 μ m)
Conversion mode	Medium conversion, storing and forwarding/straight-through
MAC address table	I K
Buffer space	1Mbit
Flow control	Full duplex state: flow control; half-duplex state: back pressure mode
Delay	Storing & forwarding: 9.6 μ s; straight-through: 0.9 μ s;
Bit error rate	<1/1000000000
MTBF	100,000 hours
LED	FX LINK/ACT (fiber link/action) SPD (twisted pair: transmission rate of 100M) TP LINK/ACT (twisted pair link/action);P1 (power supply P1) ,P2(power supply P2)
Power	12/24/48 VDC,18 ~ 30VAC input
Power consumption	2W
Operating temperature	-40~75°C
Operating humidity	5%~90%
Storage temperature	-40~85°C
Storage humidity	5%~90% (non-condensing)
Dimensions	115mm×30mm×70mm (height * width * depth)

Order information

No	Product code	NMS	Ports	Storage temperature
1	FC540A-xxxx-xx	No	1 10/100M RJ45 + 1 100M SFP port	-10~60℃
2	FC540A-xxxx-xx-T	NO	1 10/100M RJ45 + 1 100M SFP port	-40~75℃

Certificates

For more details, pls contact with us freely! ^_^