Overview

FOWAY8002M can transmit 2 channels non-condensing digital video. There are three 5-pin ports, or two 5-pin ports and one RJ45 Ethernet port on each transceiver. Each 5 pin port can be configured as 12 channels RS-232/485/422 data port2 channels bi-directional audio port2 channels unilateral switch value port or 2 channels TIL signal port. Ethernet can supply 10M or 100M wire speed, with 10/100M port adaptable.

It is now widely used in security monitoring and control systemhighwayTraffic Control Photographic Systemautomation and intelligent residence.

Character

Industrial-level design with SMT techniques

Full digital transmission in fiber, multi-service flexible configuration on the same platform

Supply desktop and integrated card type

Based on large scale integrated circuit

Transmission in single-fiber, dual-fiber is optional

Fully compatible with PAL/NTSC/SECAM

Support asynchronous data (positive/reverse), transmission rate is up to 115.200Kbps

Support RS232RS422RS485 or Manchester code

Support SNMP

Carrier class centralized network management

Technical specification

Fiber port                                         

Port                    FC/SC/ST optional

Wavelength              Single-mode1310nm/1550nm

Multi-mode 850nm/1310nm

Transmission power      ≥-9dBm

Receiving sensitivity      -34dBm(bit error rate<10^-11)

Transmission distance    Single-mode 20/40/60/80/100/120Km

Multi-mode 2Km

Video

Signal type                       PAL/NTSC/SECAM

Nominal input/output lever         1Vp-p

Nominal input/output impedance    75Ω

Bandwidth per channel             6.5 MHz

Sample frequency                 13.5MHz

Quantization                      8bit

Connector                        BNC interface

Audio

Bandwidth per channel             20Hz~20K Hz

Sample frequency                 48K Hz

Quantization                      24bit

THD (Total Harmonic Distortion)     0.1% (typical value)

Audio connector                   RJ45 interface

Asynchronous data

Connector              RS232/RS485/RS422/ Manchester code

Working mode          Full/Half Duplex

Data rate               115.200Kbps

Bit error rate            <1×10^-9

Data connector          RJ45 interface

Ethernet

Standard               IEEE802.3, IEEE802.3u

Working mode          10/100M adaptable, Full/Half Duplex

Connector              RJ45 interface

Switch value

Number of channels     2 channels

Working mode          set open/shorted circuit alarm

Connector              RJ45 interface

Operating environment

Power supply              AC180V~240V; DC-48V; DC+24V

Operating temperature      0-50

Storage temperature        -40-+70

Relative humidity           95%

Dimension

172mm×141mm×19.7mm

Order information