Product Details

FC830AM Managed Media Converter

Overview

HiOSO FC830A Series belongs to 10/100M auto-adapted Fast Ethernet Fiber Media Converter (Or called Photo-electrical Conversion) with management function, which supports SNMP Protocol,Web windows administration, remote Telnet management, Com port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.

10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 100Base-Fx and IEEE 802.3x International Standard etc. It can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broad-Band private network and Fiber Optical citywide LAN.

Feature

l Supports SNMP management, Web address management and Telnet management

l Enable/Disable optical link-loss alarm function

l Four transmission modes supported

l Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard

l Comply with IEEE 802.1Q VLAN protocol

l Support 10/100M, Full/Half duplex auto-negotiation

l Support MDI/MDIX auto sense

l Support transmission distance of up to 120km (Dual-fiber)

l Support over-size packets of up to 1912 Byte

l Support hot-swapable

l The cards work as standalone and rack-based Media Converters

l Single-fiber and dual-fiber devices are available

Technical Data

- Mechanical Parameters -

Size	32mm(H)x 165mm(W)x 128mm(D)
Operating temperature	-10~+55℃
Storage temperature	-40~+70℃
Power supply	AC220V / DC-48V

- Optical Parameters -

Multimode Fiber: 62.5/125, 50/125, 100/140μm
MM2km or MM5km	Output power: -20~-18dBm
	Receiving sensitivity: <-31dBm
	Distance: 0~2km or 0~5km
	Connector: SC(standard)/FC(optional) /ST(optional)
	Type: dual-fiber
	Wavelength: 850nm/1310nm
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm
25km	Distance: 0~25km
	Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber)
	Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber)
	Connector: SC(standard)/FC(optional) /ST(optional)
	Type: single-fiber / dual-fiber
	Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber)
40km	Distance: 0~40km
	Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber)
	Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber)
	Connector: SC(standard)/FC(optional) /ST(optional)
	Type: single-fiber / dual-fiber
	Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber)
60km	Distance: 0~60km (when less than 15km, use attenuator)
	Output power:-5~0dBm(dual-fiber),-6~0dbm(single-fiber)
	Receiving sensitivity: < -36dBm
	Connector: SC(standard)/FC(optional)
	Type: single-fiber / dual-fiber
	Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber)
80km	Distance: 0~80km (when less than 15km, use attenuator)
	Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber)
	Receiving sensitivity: < -36dBm
	Connector: SC(standard)/FC(optional)
	Type: single-fiber / dual-fiber
	Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber)
100km	Distance: 0~100km (when less than 15km, use attenuator)
	Output power:-6~-1dBm
	Receiving sensitivity: < -38dBm
	Connector: SC(standard)/FC(optional)
	Type: single-fiber / dual-fiber
	Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber)
120km	Distance: 0~120km (when less than 15km, use attenuator)
	Output power:-5~0dBm
	Receiving sensitivity: < -38dBm
	Connector: SC(standard)/FC(optional)
	Type: dual-fiber
	Wavelength: 1550nm

Order Information

Model	Rate (Mbps)	Mode	Working Wavelength (nm)	Distance (Km)	Fiber Interface	Power
FC830AM-M2-SC/ST	10/100	Dual-fiber multi-mode	1310	2	SC/ST	External DC5V/1A
FC830AMP-M2-SC/ST	10/100	Dual-fiber multi-mode	1310	2	SC/ST	Built-in AC220V/ DC-48V
FC830AMC-M2-SC/ST	10/100	Dual-fiber multi-mode	1310	2	SC/ST	Module card: DC5V
FC830AM-S20/40/60- SC/FC	10/100	Dual-fiber single-mode	1310	25/40/60	SC/FC	External DC5V/1A
FC830AM-S80/100/120-SC/FC	10/100	Dual-fiber single-mode	1550	80/100/120	SC/FC	External DC5V/1A
FC830AMP-S20/40/60- SC/FC	10/100	Dual-fiber single-mode	1310	25/40/60	SC/FC	Built-in AC220V/ DC-48V
FC830AMP-80/100/120-SC/FC	10/100	Dual-fiber single-mode	1550	80/100/120	SC/FC	Built-in AC220V/ DC-48V
FC830AMC-S20/40/60- SC/FC	10/100	Dual-fiber single-mode	1310	25/40/60	SC/FC	Module card DC5V
FC830AMC-S80/100/120-SC/FC	10/100	Dual-fiber single-mode	1550	80/100/120	SC/FC	Module card DC5V
FC830AMS-S20/40/60/80/100-SC	10/100	Single-fiber single-mode	WDM 1310/1550	25/40/60/80/100	SC	External DC5V/1A
FC830AMPS-S20/40/60/80/100-SC	10/100	Single-fiber single-mode	WDM 1310/1550	25/40/60/80/100	SC	Built-in AC220V/ DC-48V
FC830AMCS-S20/40/60/80/100-SC	10/100	Single-fiber single-mode	WDM 1310/1550	25/40/60/80/100	SC	Module card DC5V