10/100M LFA function managment fiber optic to rj45 media converter
USD $2 - $200 /Piece
Min.Order:2 Pieces
HiOSO FC830A Series belongs to 10/100M auto-adapted Fast Ethernet Fiber Media Converter (Or called Photo-electrical Conversion) with management function, which supports SNMP Protocol,Web windows administration, remote Telnet management, Com port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 100Base-Fx and IEEE 802.3x International Standard etc. It can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broad-Band private network and Fiber Optical citywide LAN.
Feature
l Supports SNMP management, Web address management and Telnet management
l Enable/Disable optical link-loss alarm function
l Four transmission modes supported
l Comply with IEEE 802.3μ 100BASE-FX/TX, IEEE802.3 10BASE-T standard
l Comply with IEEE 802.1Q VLAN protocol
l Support 10/100M, Full/Half duplex auto-negotiation
l Support MDI/MDIX auto sense
l Support transmission distance of up to 120km (Dual-fiber)
l Support over-size packets of up to 1912 Byte
l Support hot-swapable
l The cards work as standalone and rack-based Media Converters
l Single-fiber and dual-fiber devices are available
Technical Data
- Mechanical Parameters -
Size | 32mm(H)x 165mm(W)x 128mm(D) |
Operating temperature | -10~+55℃ |
Storage temperature | -40~+70℃ |
Power supply | AC220V / DC-48V |
- Optical Parameters -
Multimode Fiber: 62.5/125, 50/125, 100/140μm | |
MM2km or MM5km | Output power: -20~-18dBm |
Receiving sensitivity: <-31dBm | |
Distance: 0~2km or 0~5km | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: dual-fiber | |
Wavelength: 850nm/1310nm | |
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm | |
25km | Distance: 0~25km |
Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber) | |
Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
40km | Distance: 0~40km |
Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber) | |
Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
60km | Distance: 0~60km (when less than 15km, use attenuator) |
Output power:-5~0dBm(dual-fiber),-6~0dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
80km | Distance: 0~80km (when less than 15km, use attenuator) |
Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
100km | Distance: 0~100km (when less than 15km, use attenuator) |
Output power:-6~-1dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
120km
| Distance: 0~120km (when less than 15km, use attenuator) |
Output power:-5~0dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: dual-fiber | |
Wavelength: 1550nm |
Order Information
Model | Rate | Mode | Working Wavelength (nm) | Distance (Km) | Fiber Interface | Power |
FC830AM-M2-SC/ST | 10/100 | Dual-fiber multi-mode | 1310 | 2 | SC/ST | External DC5V/1A |
FC830AMP-M2-SC/ST | 10/100 | Dual-fiber multi-mode | 1310 | 2 | SC/ST | Built-in AC220V/ DC-48V |
FC830AMC-M2-SC/ST | 10/100 | Dual-fiber multi-mode | 1310 | 2 | SC/ST | Module card: DC5V |
FC830AM-S20/40/60- SC/FC | 10/100 | Dual-fiber single-mode | 1310 | 25/40/60 | SC/FC | External DC5V/1A |
FC830AM-S80/100/120-SC/FC | 10/100 | Dual-fiber single-mode | 1550 | 80/100/120 | SC/FC | External DC5V/1A |
FC830AMP-S20/40/60- SC/FC | 10/100 | Dual-fiber single-mode | 1310 | 25/40/60 | SC/FC | Built-in AC220V/ DC-48V |
FC830AMP-80/100/120-SC/FC | 10/100 | Dual-fiber single-mode | 1550 | 80/100/120 | SC/FC | Built-in AC220V/ DC-48V |
FC830AMC-S20/40/60- SC/FC | 10/100 | Dual-fiber single-mode | 1310 | 25/40/60 | SC/FC | Module card DC5V |
FC830AMC-S80/100/120-SC/FC | 10/100 | Dual-fiber single-mode | 1550 | 80/100/120 | SC/FC | Module card DC5V |
FC830AMS-S20/40/60/80/100-SC | 10/100 | Single-fiber single-mode | WDM 1310/1550 | 25/40/60/80/100 | SC | External DC5V/1A |
FC830AMPS-S20/40/60/80/100-SC | 10/100 | Single-fiber single-mode | WDM 1310/1550 | 25/40/60/80/100 | SC | Built-in AC220V/ DC-48V |
FC830AMCS-S20/40/60/80/100-SC | 10/100 | Single-fiber single-mode | WDM 1310/1550 | 25/40/60/80/100 | SC | Module card DC5V |