Specifications

1.Cloud based IP Alarm support Android and IOS APP
2.Control your home by mobile APP anywhere
3.No need GSM Card

Finseen New Cloud IP Technology Home Security Burglar/Intruder Alarm

Alarm transmission over IP Presentation

 

 

 

 

Control your home by mobile APP anywhere 
Instant PUSH and email notification 
99wireless zone fully protect your home

 

1.       What is Finseen Cloud IP Alarm System?

 

Finseen Cloud based IP Alarm is a latest technology burglar alarm system controlled by your smart phone or tablet via the internet. The IP Alarm Cloud drives the system, which provide you with information about who enters your house, which sensor has been triggered etc. Notifications are distributed to friends and neighbors, ether by PUSH or email. Power and internet connections are surveyed online. Should one interrupt the power or the internet, the system will notify you within seconds. The app can monitor and control the system from anywhere as long as your phone or tablets connected to the internet.

 

 

Feature:

1) Command for Arm delay,Alarm delay, Alarm zone with or without intellegent door sensor uploading open or close status function, active siren, close siren can be set through Internet.

2) Learn Remote Control and Detector ; Delete Remote Control and Detector.

3) Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.

4) Upload Status for Alarm panel: Away Arm, Home Arm, Disarm,Low voltage, Recovery of Low voltage, External power on, Cutting external power, Tamper-proof, Periodic upload(include Remote Control ID which operate Away Arm,Home Arm, Disarm).

5) Upload Low voltage of Detector, Alarm Zone,Tamper-Proof triggered.

6) Support setting alarm zone with intellegent door sensor  function: triggerred by open or close door, and upload Status of Alarm zone

7) Alarm siren keeping time is 2minutes.

8) Can be set with 10pcs of Remote Control ID

9) Can be set with 99 wireless zone, and each zone can

learn 1pc of accessories.

 

Operation introduction:

1) Arm/Disarm:

There are 2 way to Arm/Disarm: set by wireless remote control and Internet control

      

Away arm/Home arm: When alarm panel receive “Away Arm” or “Home arm” command, the buzzer and loudspeaker will sound “di” to show arm successfully.

 

If enable arm delay, go into arm delaying status, the buzzer will sound “di” one time each second.

When arm delay finished, there is long “di---” to show arm successfully, and the blue light flash slowly at rate of  flash one time each 3seconds.

 

Disarm: When alarm panel received command for “Disarm”, then the buzzer and loudspeaker will “di” for 2times.

        Blue light keep on when with external power.

        Blue light off when without external power

 

2) Set the system parameter (Please reference Communication protocol )

Set though Internet: Arm delay, Alarm delay, upload Status of Intelligent door sensor open or closed, siren start or closed.

Scope for Arm delay: 0-59seconds

Scope for Alarm delay: 0-59seconds

 

3) Wireless learning or deleting

  Learning method: Internet control

When alarm panel received learning command, Red light will keep on, and active wireless detector or remote control.

The wireless learning time is 30seconds:

If learned successfully, the Red light will flash quickly for 5seconds, and buzzer will sound “di” for 5times at same rate as Red light flashing.

If learned unsuccessfully, the Red light off, and buzzer will sound “di-” as long as 1.5seconds.

4) Alarm

When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.

When alarm delay finished, it will go into alarm status, and blue light will flash quickly.

And alarm time is 2seconds.

And the alarm panel can be active emergency alarm through Internet.

 

 

5) Intelligent zone function:

If there is one zone of wireless zone1-99 is set as intelligent door sensor, and enable function of Intelligent door sensor for status of open and close uploading, then the status of intelligent door sensor will be uploaded to Internet separately.

 

 

6) Power on and Low voltage

A.Power on

When external power is cut off for 8seconds, blue light off under status of disarm, and upload power cutting off status to Internet.

When the alarm panel recover external power on, blue light on under status of disarm, and upload power recovery status to Internet.

 

 

B. Battery

   When low voltage of battery keep for 8seconds, blue light keep on, and upload status of battery low voltage to Internet.

       When low voltage of battery recovery more than 8seconds,blue light off, and upload status of low voltage recovery status to Internet.

 

 

7) Upload status of low voltage of accessories, and tamper-proof

   When alarm panel received command for detector low voltage or Tamper-proof triggered, the alarm panel will upload detector low voltage or Tamper-triggered information to Internet.

 

 

8) Function of Periodic upload

Alarm panel will upload signal of system working normal to Internet.

 

 

 

9) IP Alarm APP interface:

 

 

 

 

 

 

IP Cloud Alarm System FC-300 VS GSM Alarm Standalone system

 

	FC-300	GSM Alarm	Comment
Free subscription	√	Χ	IP Cloud Alarm FC-300 uses free existing broadband internet. GSM Alarm uses SIM Card with a running subscription
24/7 System Monitoring	√	Χ	IP Cloud Alarm FC-300: Broken connections are monitored 24/7 by the IP Cloud. If the connection is interrupted the user gets notified.   GSM Alarm: are unable to communicate if the GSM connections are broken or jammed.
Communication technology	Internet	SMS Text messaging	IP Cloud Alarm FC-300 uses an open encrypted connection to the Cloud and is monitored continuously.   GSM Alarm uses SMS as indirect communication between the base unit and the mobile device. There is no continuously open communication line.
Internet Cloud service	√	Χ	IP Cloud Alarm FC-300continuously streams data between the base unit and the cloud. The Cloud checks the data and convert it to useful information presented on the users mobile device. GSM Alarm collects data by SMS. Each small data package is transferred via one SMS. There is no cloud to calculate the data.
Worldwide access	2-way Broadband	Text messaging	The accuracy of the IP Cloud Alarm FC-300 is better than a SMS GSM Alarm. Even by larger distance the operation works flawless. All communication with the IP Cloud is verified. This guarantees that each command is successful.   GSM Alarm uses SMS technology. The telephone line companies do less and jam less to maintain the SMS services because more and more users prefer IP based short message services e.g. Facebook, iMessage etc. Users may therefore expect some disturbance, especially by intercontinental use.
Push notification	√	Χ	IP Cloud Alarm FC-300 sends out notifications via PUSH. GSM Alarm can't notify by PUSH.   Push technology works via the internet. Therefore there is no PUSH available.
Email Notification	√	Χ	IP Cloud Alarm FC-300 sends out notifications via email.   GSM Alarm can't notify by email. Email technology works via the internet. There is no internet connects to GSM Systems.
Server assisted multiple language module	√	Χ	IP Cloud Alarm FC-300: The IP Cloud Server is a central monitoring service. Therefore, languages, culture settings etc. are controlled by the cloud server.
Mobile App	√	√	IP Cloud Alarm FC-300: The APP is the main user interface for the system. All functions are controlled via app.   GSM Alarm can connect to an APP, but there are many limitations since all commanding is carried out via SMS.

 

 

Packaging & Shipping

 Packing for Finseen 868mhz Cloud IP Alarm System: 

1 set/gift box, 6 boxes/carton

 

Carton Size:  49cm*30.5cm*22.5cm

 

Volume Weigh for 1 Carton: 7kg

 

 

Standard Kits consist of:

 

 

1 pc of Alarm Host,

1pc of PIR Detector,

1pc of Door Sensor,

1pc of Remote Control,

1pc of Lan Cable,

1pc of Power Supply.