Home DIY Cloud based IP Alarm security TCP/IP connection Home Alarm system with APP control

Getting and installing an alarm system in your home has never been so easy. Choose the Wireless Security Kit you want to start with and the additional components to cover up your entire premises. With all the additional accessories and sensors, the Finseen IP Cloud Alarm Wireless Security System is suitable for homes, offices, retail stores, or any other location where security may be a concern.

NO CONTRACT,NO MONTHLY FEES

NO SET UP OR HIDDEN FEES

We'll never make you sign a long term contract or pay monthly fees to protect your home! You're in Complete Control.
Unlike other traditional security companies, we offer a great value for a reasonable price. The purchase of the Finseen IP Cloud Alarm Wireless Alarm System saves you the installation fee and the monthly service charges.

Operation introduction:

1) Arm/Disarm:

There are 2 way to Arm/Disarm: set by wireless remote control and Internet control

Away arm/Home arm: When alarm panel receive “Away Arm” or “Home arm” command, the buzzer and loudspeaker will sound “di” to show arm successfully.

If enable arm delay, go into arm delaying status, the buzzer will sound “di” one time each second.

When arm delay finished, there is long “di---” to show arm successfully, and the blue light flash slowly at rate of  flash one time each 3seconds.

Disarm: When alarm panel received command for “Disarm”, then the buzzer and loudspeaker will “di” for 2times.

        Blue light keep on when with external power.

        Blue light off when without external power

2) Set the system parameter (Please reference Communication protocol )

Set though Internet: Arm delay, Alarm delay, upload Status of Intelligent door sensor open or closed, siren start or closed.

Scope for Arm delay: 0-59seconds

Scope for Alarm delay: 0-59seconds

3) Wireless learning or deleting

  Learning method: Internet control

When alarm panel received learning command, Red light will keep on, and active wireless detector or remote control.

The wireless learning time is 30seconds:

If learned successfully, the Red light will flash quickly for 5seconds, and buzzer will sound “di” for 5times at same rate as Red light flashing.

If learned unsuccessfully, the Red light off, and buzzer will sound “di-” as long as 1.5seconds.

4) Alarm

When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.

When alarm delay finished, it will go into alarm status, and blue light will flash quickly.

And alarm time is 2seconds.

And the alarm panel can be active emergency alarm through Internet.

5) Intelligent zone function:

If there is one zone of wireless zone1-99 is set as intelligent door sensor, and enable function of Intelligent door sensor for status of open and close uploading, then the status of intelligent door sensor will be uploaded to Internet separately.

6) Power on and Low voltage

A.Power on

When external power is cut off for 8seconds, blue light off under status of disarm, and upload power cutting off status to Internet.

When the alarm panel recover external power on, blue light on under status of disarm, and upload power recovery status to Internet.

B. Battery

   When low voltage of battery keep for 8seconds, blue light keep on, and upload status of battery low voltage to Internet.

       When low voltage of battery recovery more than 8seconds,blue light off, and upload status of low voltage recovery status to Internet.

7) Upload status of low voltage of accessories, and tamper-proof

   When alarm panel received command for detector low voltage or Tamper-proof triggered, the alarm panel will upload detector low voltage or Tamper-triggered information to Internet.

8) Function of Periodic upload

Alarm panel will upload signal of system working normal to Internet.

9) IP Alarm APP interface:

IP Cloud Alarm System FC-300 VS GSM Alarm Standalone system

Specification:

•Control Host has internal backup battery,which can support alarm when there is a power cut.

•Support IOS & Android

•Suitable for residential and commercial alarm.

•Learning each accessories: If you wish to add additional sensors now or later, don't worry about opening the sensor and manipulating jumpers. What you need to do is simply to go to the menu ‘Device’in the IP app.Select‘+’to add Device.Press ‘Enroll’and follow the instructions in the Video.then press a button on the sensor and done.

•Support alarm history records and status history records
•99 wireless defense zones: Each defense zone can be named one wireless sensor, so totally can be named 99 wireless sensors
•Support arm (exit) delay and alarm (entry) delay      

•The function of motion detecting with alarm (via PIR)
•Smoke detection with alarm (via smoke alarm)   •No need telephone line.Operate everything such as arm and disarm via you smartphone or tablet. •Simply connect wireless Control Host to the Internet.
•Send notification automatically via mobile network, if an  alarm occurs.
•Use a smartphone to control your alarm system or you can control via  the text message, from anywhere in the world. 
•Use remote control to arm,disarm,home arm.
•Start to work with the password, which ensure the safety of the  system
•All the alarm system is wireless in signal transmission, no need to run wires and is easy installation
•Linear wireless transmission distance in open air without  block for control host: up to 100m.
•2year Warranty.

Standard Kits

Welcome to visit our factory. 

Looking forward to receive your inquiry and our nice cooperation in near future!