Specifications

HSIT is specially designed to
repair the buried /over the cable or pipe .
It's mainly used for insulating anti-corrosive .

Heat Shrink Insulating Tape/heat shrink haute temperature

Application 

Heat shrinkable Insulating tape is specially designed to repair the buried / over the cable or pipe It is mainly used for insulating, anti-corrosive and mending purposes at the bending part. It may also be wound around the whole cable or pipe for insulating and anti-corrosive purpose. It uses crosslinked polyolefin as the base material with a special heat seal coating. Sound bonding is formed on the pipe or cable surface when applied together with solid epoxy coating.

 

1. Partial Repair of the cable protective layers suffered by mechanical and heat damage and erosions and breakages caused by organic solvents;
2. Waterproof treatment at the ends of protective sleevings of heat shrinkable power cable joints;
3. Protection of electriferous naked conductors and treatment of shortcut circuit caused by icicles;
4. Anti-corrosion and seal of pipes;
5. Insulation of bus bars in switch gear cupboards and power stations;
6. Other areas where insulations and seals are needed.

 

Color: Red, Yellow, Green and Black

Characteristics:

1. Self shrink rate> 30%;
2. Operating temperature: -55°C~105°C;
3. Shrink Temperature: 125°C.

 

 

 

 

 

Property:

Property	Test Method	Standard Value
Tensile strength	ASTM D638	≥10.4MPa
Elongation	ASTM D638	≥200%
Tensile after aging	ASTMD 2671/120°C, 168h	≥10MPa
Elongation after aging	ASTMD 2671/120°C, 168h	≥200%
Dielectric Strength	IEC 243	≥10kV/mm
Volume Resistivity	IEC 250	≥1014Ω. cm

 

Specification:

Size	Standard Width(mm)	Standard Thickness(mm)	Standard Length(m)
HSIT-0825	25	0. 8±0. 1	5 or 10
HSIT-0850	50	0. 8±0. 1	5 or 10
HSIT-08100	100	0. 8±0. 1	5 or 10
HSIT-1025	25	1. 0±0. 1	5 or 10
HSIT-1050	50	1. 0±0. 1	5 or 10
HSIT-10100	100	1. 0±0. 1	5 or 10