Product Details

Specifications

Designed with a layer of spiral
coated hot melt adhesive in the
internal surface of the end cap,

heat shrinkable spiral adhesive cable end cap

Applications
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.

Technical Data

Property	Test Method	Typical Data
Operating temperature	IEC 216	-55°C to +110°C
Tensile strength	ASTM D 638	>14 MPa
Elongation at break	ASTM D 638	> 400%
Density	ASTM D 792	1.05
Elongation at break after aging	150°C, 168hrs	>300%
Dielectric strength	IEC 243	>15KV/mm
Volume resistance	IEC 93	>1014Ω.cm

Specification

Part No.	Inner Diameter			After fully recovered Length ± 10%	After fully recovered Width ± 10%	Cable diameter
Part No.	As supplied (min)		After fully recovered (max)	After fully recovered Length ± 10%	After fully recovered Width ± 10%	Cable diameter
Standard length end cap
HSEC-12/ 4		12	4.0	40	2.6	4-10
HSEC-14/ 5		14	5.0	45	2.2	5-12
HSEC-20/ 6		20	6.0	55	2.8	6-16
HSEC-25/ 8.5		25	8.5	68	2.8	10-20
HSEC-35/ 16		35	16.0	83	3.3	17-30
HSEC-40/ 15		40	15.0	83	3.3	18-32
HSEC-55/ 26		55	26.0	103	3.5	28-48
HSEC-75/ 36		75	36.0	120	4.0	45-68
HSEC-100/ 52		100	52.0	140	4.0	55-90
HSEC-120/ 60		120	60.0	150	4.0	65-110
HSEC-145/ 60		145	60.0	150	4.0	70-130
HSEC-160/ 82		160	82.0	150	4.0	90-150
HSEC-200/ 90		200	90.0	160	4.2	100-180
Extended length end cap
HSEC-L-14/ 5		14	5.0	55	2.2	5-12
HSEC-L-42/15		42	15.0	110	3.3	18-34
HSEC-L-55/ 23		55	23.0	140	3.8	25-48
HSEC-L-62/ 23		62	23.0	140	3.8	25-55
HSEC-L-75/ 32		75	32.0	150	4.0	40-68
HSEC-XL-75/ 36		75	36.0	170	4.2	45-68
HSEC-L-105/ 45		105	45.0	150	4.0	50-90

End cap with valve is available on request